The Tierre OTR series OTRUT is a nickel-plated brass push-in union tee for compressed air and vacuum, for metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″. Working pressure 20 bar, temperature from -20 °C to 80 °C.
Available product codes: OTRUT04-532, OTRUT0600, OTRUT08-516, OTRUT1000, OTRUT1200, OTRUT1-4, OTRUT38, OTRUT1-2.
The Tierre OTR series brass push-in union tee OTRUT is a union tee with three push-in connections, to branch a line by joining three tubes of the same diameter. It is available for metric and inch tubes.
Connection is quick and needs no tools. The static collet system prevents any tube movement once inserted and keeps the seal tight, and each fitting is designed to provide the largest possible flow passage for the tube diameter and thread size.
The fitting is suitable for compressed air and vacuum and is part of the Tierre OTR series brass push-in fittings range, together with the brass push-in union elbow OTRUL and the brass push-in union Y OTRY.
The body is made of electrolytically nickel-plated brass, a finish designed for maximum service life. The products are silicone free and comply with REACH regulation EC 1907/2006 and RoHS directive EU 2015/863. The materials listed in the catalogue for the OTR series are:
Available for metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″.
Compatible with polyamide (PA), polyurethane (PU) and polyethylene (PE) tubes, such as the PUES polyurethane pneumatic tubing. To connect correctly:
A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time. Polyurethane tube expands under pressure and may not be reinsertable: in that case cut off the section that was held in the fitting.
| Tube Ø | Tube tolerance (mm) | Insertion length (mm) |
|---|---|---|
| 4 mm | ±0.1 | 14 |
| 6 mm | ±0.1 | 15.5 |
| 8 mm | ±0.1 | 17.5 |
| 10 mm | ±0.15 | 19 |
| 12 mm | ±0.15 | 21 |
| 5/32″ | ±0.1 | 14 |
| 1/4″ | ±0.1 | 16 |
| 5/16″ | ±0.1 | 17.5 |
| 3/8″ | ±0.15 | 18.5 |
| 1/2″ | ±0.15 | 21.5 |
| Feature | Value / Specification |
|---|---|
| Series | Tierre OTR series |
| Fluids | Compressed air and vacuum |
| Operating temperature | -20 °C to 80 °C |
| Working pressure | 20 bar |
| Vacuum | -0.95 bar (-95 kPa) |
| Tube Ø | Metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″ |
| Compatible tubes | Polyamide PA, polyurethane PU, polyethylene PE |
| Body | Nickel-plated brass UNI EN 12164 CW614N and CW617N |
| Compliance | REACH EC 1907/2006, RoHS EU 2015/863, silicone free |
Version for metric tubes
| Code | ØD | ØP | L1 | L2 | Weight (g) |
|---|---|---|---|---|---|
| OTRUT04-532 | 4 | 10 | 18.0 | 36.0 | 17.0 |
| OTRUT0600 | 6 | 12 | 19.5 | 39.0 | 20.0 |
| OTRUT08-516 | 8 | 14 | 22.5 | 45.5 | 30.0 |
| OTRUT1000 | 10 | 16 | 25.5 | 50.5 | 37.0 |
| OTRUT1200 | 12 | 19 | 29.0 | 58.5 | 68.0 |
Version for inch tubes
| Code | ØD | ØP | L1 | L2 | Weight (g) |
|---|---|---|---|---|---|
| OTRUT04-532 | 5/32″ | 10 | 18.0 | 36.0 | 17.0 |
| OTRUT1-4 | 1/4″ | 13 | 21.0 | 42.0 | 27.0 |
| OTRUT08-516 | 5/16″ | 14 | 22.5 | 45.5 | 30.0 |
| OTRUT38 | 3/8″ | 16 | 25.0 | 50.5 | 38.0 |
| OTRUT1-2 | 1/2″ | 19 | 29.0 | 58.0 | 59.0 |
Dimensions refer to the technical drawing in the downloadable PDF data sheet and are in mm, except values given in inches (“).
Technical data from the Tierre OTR series catalogue, ed. 2.0 03/2023: they may be changed by the manufacturer without notice.