The Tierre HFR series HFRMM food grade push-in bulkhead union is made of brass with TEA+ surface treatment, resistant to corrosion and chemicals. It is suitable for compressed air, vacuum, water and fluids compatible with its materials, including the food sector and coffee machines, for tubes from 4 to 12 mm. Working pressure up to 20 bar.
Available product codes: HFRMM04, HFRMM06, HFRMM08, HFRMM10, HFRMM12.
The Tierre HFR series HFRMM food grade push-in bulkhead union is a bulkhead fitting: the threaded body passes through a wall or panel and there is a push-in connection for the tube at both ends.
HFR series push-in fittings have a brass body and collet with TEA+ surface treatment, which provides high resistance to corrosion and chemicals. They are designed for reliability and high mechanical efficiency and can be used in the food sector and in coffee machines. They are made in Italy and, on specific request, customised versions can be developed.
The fitting is part of the Tierre HFR series food grade push-in fittings range, together with the food grade push-in straight union HFRUC.
The TEA+ surface treatment is highly resistant to corrosion in acidic or alkaline environments. According to the catalogue:
The materials listed in the catalogue for the HFR series are:
The bulkhead body has a metric thread that varies with the tube diameter:
| Tube Ø (mm) | Body thread |
|---|---|
| 4 | M12x1 |
| 6 | M14x1 |
| 8 | M16x1 |
| 10 | M20x1 |
| 12 | M22x1.5 |
Compatible with polyamide PA, polyethylene PE, FEP and PTFE tubes. To connect correctly:
A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.
| Tube Ø (mm) | Outside diameter tolerance (mm) | Insertion length (mm) |
|---|---|---|
| 4 | ±0.1 | 14 |
| 6 | ±0.1 | 15.5 |
| 8 | ±0.1 | 17.5 |
| 10 | ±0.15 | 19 |
| 12 | ±0.15 | 21 |
| Feature | Value / Specification |
|---|---|
| Series | Tierre HFR series food grade |
| Fluids | Compressed air and vacuum, water and fluids compatible with the construction materials |
| Operating temperature | -20 °C to 150 °C |
| Working pressure | 20 bar |
| Vacuum | -0.95 bar (-99 kPa) |
| Body thread | from M12x1 to M22x1.5 |
| Tube Ø | from 4 to 12 mm |
| Compatible tubes | Polyamide PA, polyethylene PE, FEP, PTFE |
| Body | Brass with TEA+ surface treatment |
| Sectors | Food, coffee machines and industrial applications |
| Code | ØD | T | ØP | L | A MAX | CH |
|---|---|---|---|---|---|---|
| HFRMM04 | 4 | M12x1 | 10 | 34.0 | 15 | 16 |
| HFRMM06 | 6 | M14x1 | 12 | 32.0 | 12 | 17 |
| HFRMM08 | 8 | M16x1 | 14 | 36.5 | 16 | 19 |
| HFRMM10 | 10 | M20x1 | 16 | 43.0 | 19 | 24 |
| HFRMM12 | 12 | M22x1.5 | 19 | 44.0 | 20 | 25 |
Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet.
Technical data from the catalogue Tierre Food grade Serie HFR, ed. 1.0 08/2020.