Search
Products

AISI 316L stainless steel push-in fitting straight female BSPP thread – XVRCF-G – Tierre

The Tierre XVR series XVRCF-G AISI 316L stainless steel push-in fitting straight female BSPP thread has an AISI 316L stainless steel body and collet and is suitable for aggressive environments, critical operating conditions and food contact applications. For compressed air, vacuum, water and fluids compatible with its materials, for tubes from 4 to 8 mm, with BSPP parallel thread (ISO 228) from G1/8″ to G1/4″. Working pressure up to 20 bar.

Available product codes: XVRCF04G01, XVRCF06G01, XVRCF08G02.

Description

How it works and applications

The Tierre XVR series XVRCF-G AISI 316L stainless steel push-in fitting straight female BSPP thread is a straight fitting with a female BSPP parallel thread and a push-in connection for the tube, to connect the line to a male port.

XVR series push-in fittings have an AISI 316L stainless steel body and collet. The catalogue describes them as suitable for aggressive environments and critical operating conditions and for food contact applications, with an optimised compact design. Customised products can be developed on specific request.

The fitting is part of the Tierre XVR series AISI 316L stainless steel push-in fittings range, together with the AISI 316L stainless steel push-in fitting straight male BSPT and BSPP thread XVRC-R / XVRC-G.

Materials

The materials listed in the catalogue for the XVR series are:

  • Body: AISI 316L stainless steel
  • Collet: AISI 316L stainless steel
  • Spacer: PVDF-UHM compliant with the FDA directive
  • O-ring: FKM certified NSF/ANSI 61, compliant with the FDA directive
  • Seal: FKM certified NSF/ANSI 61, compliant with the FDA directive
  • Gripping ring: AISI 301 stainless steel
  • Collar: PVDF-UHM compliant with the FDA directive
  • Release ring for swivel systems: AISI 302 stainless steel

The products comply with REACH 1907/2006 and EU directive 2015/863.

Threads and sizes available

Available with BSPP parallel thread (ISO 228) from G1/8″ to G1/4″, for tubes from 4 to 8 mm. The combinations listed in the catalogue are:

Tube Ø (mm) Available threads
4 G1/8″
6 G1/8″
8 G1/4″

The catalogue gives tightening torques for male threads; for the female port refer to the PDF data sheet.

Compatible tubes and connection

Compatible with polyamide PA, polyethylene PE, FEP, PTFE and grooved stainless steel tubes. With metal tubes the tube ends must be deburred, to avoid cuts or other damage to the O-rings. For grooved stainless steel tubes the catalogue gives these dimensions:

Tube Ø (mm) L (mm) A (mm)
4 7.6 0.23
6 8.0 0.23
8 9.0 0.23

To connect correctly:

  1. cut the tube at 90° with a suitable tube cutter;
  2. push it fully in, up to the stop;
  3. pull it gently to check that it is locked.

A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.

Tube Ø (mm) Outside diameter tolerance (mm) Insertion length (mm)
4 ±0.1 14
6 ±0.1 15.5
8 ±0.1 17.5

Technical summary

Feature Value / Specification
Series Tierre XVR series AISI 316L stainless steel
Fluids Compressed air, vacuum, water and fluids suitable for the construction materials
Operating temperature -20 °C to 150 °C
Working pressure 20 bar
Vacuum -0.95 bar (-99 kPa)
Thread BSPP parallel thread (ISO 228) from G1/8″ to G1/4″
Tube Ø from 4 to 8 mm
Compatible tubes Polyamide PA, polyethylene PE, FEP, PTFE, grooved stainless steel
Body and collet AISI 316L stainless steel
Compliance REACH 1907/2006, EU 2015/863

Product codes

Code ØD T ØP A L CH
XVRCF04G01 4 G1/8″ 10 7.5 24.5 13
XVRCF06G01 6 G1/8″ 12 7.5 26 13
XVRCF08G02 8 G1/4″ 14 11 30 16

Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet.

Technical data from the catalogue Tierre Serie XVR Inox AISI 316L, ed. 1.2 08/2020.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO