Download
Catalogs and technical documentation
Junction for WTR series push-in fittings – WTRIJ / WTRIJ-N – Tierre
The Tierre WTRIJ / WTRIJ-N junction for WTR series push-in fittings has a nickel-plated brass and PBT technopolymer body and works up to 16 bar and in vacuum down to -0.999 bar, from -20 to 80 °C. Available for metric tubes from 4 to 16 mm and inch tubes from 5/32″ to 1/2″.
Available product codes: WTRIJ04, WTRIJ06, WTRIJ08, WTRIJ10, WTRIJ12, WTRIJ16, WTRIJ532, WTRIJ316, WTRIJ1-4, WTRIJ516, WTRIJ38, WTRIJ1-2.
Junction for WTR series push-in fittings – WTRIJ / WTRIJ-N – Tierre
The Tierre WTRIJ / WTRIJ-N junction for WTR series push-in fittings is a straight junction for tubes of the same diameter.
It combines the catalogue versions: WTRIJ (metric tube); WTRIJ-N (inch tube).
In the inch-tube versions the catalogue dimensions are in inches and the weight in pounds (LB).
WTR series push-in fittings are the result of over 20 years of experience in the market: they work up to 16 bar, are suitable for vacuum applications, are 100% leak-proof tested and made of top quality technopolymers and silicone free materials, in compliance with ISO 14743. The static gripping system stops all movement of the tube once inserted, granting a leak-proof connection, and every fitting is designed to guarantee the maximum possible flow rate according to the tube diameter and the thread. The plastic stem system allows connection with different kinds of fittings.
It is part of the Tierre WTR series push-in fittings range, together with the WTR series push-in multi-tee union with lateral stem WTRKJ / WTRKJ-N and the reduced junction for WTR series push-in fittings WTRIG / WTRIG-N.
The materials listed in the catalogue for the series are:
Products compliant with REACH 1907/2006 and RoHS 2011/65/EU.
Compatible with polyamide PA, polyurethane PU and polyethylene PE tubes, such as the PUES polyurethane pneumatic tubing. To connect correctly, cut the tube off square (90°), insert it up to the end stop and pull back gently to check it is connected. A damaged, scratched or oval tube can cause air leakage or tube release. The OD of polyurethane tube expands with pressure: check it and renew the tube if the expansion is out of tolerance.
To disconnect, make sure the system pressure is zero, press the release sleeve towards the fitting with one hand and pull the tube away with the other; always cut back the section of tube previously inserted before reinserting it, using a proper tube cutter.
| Tube Ø (mm) | 4 | 6 | 8 | 10 | 12 | 14 | 16 |
|---|---|---|---|---|---|---|---|
| Tolerance (mm) | ±0.1 | ±0.1 | ±0.1 | ±0.15 | ±0.15 | ±0.15 | ±0.15 |
| Tube Ø (inch) | 5/32 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 |
|---|---|---|---|---|---|---|
| Tolerance (inch) | ±0.003 | ±0.003 | ±0.003 | ±0.003 | ±0.005 | ±0.005 |
| Feature | Value / Specification |
|---|---|
| Series | Tierre WTR |
| Operating temperature | -20 °C to 80 °C |
| Working pressure | 16 bar |
| Vacuum | -750 mmHg (-0.999 bar) |
| Fluids | Compressed air and vacuum |
| Metric tube (ØD) | from 4 to 16 mm |
| Inch tube (ØD) | from 5/32″ to 1/2″ |
| Compatible tubes | Polyamide PA, polyurethane PU, polyethylene PE |
| Body | Nickel-plated brass and PBT |
| Compliance | REACH 1907/2006, RoHS 2011/65/EU |
WTRIJ – Junction
| Code | ØD | L | GR. |
|---|---|---|---|
| WTRIJ04 | 4 | 35 | 0.4 |
| WTRIJ06 | 6 | 37 | 0.8 |
| WTRIJ08 | 8 | 41 | 1.2 |
| WTRIJ10 | 10 | 51 | 2.7 |
| WTRIJ12 | 12 | 54 | 3.5 |
| WTRIJ16 | 16 | 58 | 5.3 |
WTRIJ-N – Junction
| Code | ØD | L | LB |
|---|---|---|---|
| WTRIJ532 | 5/32 | 1.377 | 0.008 |
| WTRIJ316 | 3/16 | 1.377 | 0.016 |
| WTRIJ1-4 | 1/4 | 1.456 | 0.001 |
| WTRIJ516 | 5/16 | 1.614 | 0.002 |
| WTRIJ38 | 3/8 | 2.007 | 0.005 |
| WTRIJ1-2 | 1/2 | 2.125 | 0.007 |
Dimensions refer to the technical drawing in the downloadable PDF data sheet; GR. is the weight in grams, LB in pounds.
Technical data from the catalogue Tierre WTR Series push-in fittings, ed. 1.0 07/2019.