Download
Catalogs and technical documentation
WTR series flat unidirectional flow regulator with handle regulation – WTRNSF / WTRNSF-N – Tierre
The Tierre WTRNSF / WTRNSF-N WTR series flat unidirectional flow regulator with handle regulation has a nickel-plated brass and PBT technopolymer body and works with compressed air up to 10 bar, from -20 to 80 °C. Available for metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″.
Available product codes: WTRNSF04, WTRNSF06, WTRNSF08, WTRNSF10, WTRNSF12, WTRNSF532, WTRNSF316, WTRNSF1-4, WTRNSF516, WTRNSF38, WTRNSF1-2.
WTR series flat unidirectional flow regulator with handle regulation – WTRNSF / WTRNSF-N – Tierre
The Tierre WTRNSF / WTRNSF-N WTR series flat unidirectional flow regulator with handle regulation is a flat unidirectional flow regulator with handle regulation, available for metric (WTRNSF) and inch (WTRNSF-N) tubes.
In the inch-tube versions the catalogue dimensions are in inches and the weight in pounds (LB).
WTR series flow regulators offer solutions for every kind of application, with precise regulation for the highest energy saving and optimised dimensions and performance.
It is part of the Tierre WTR series push-in fittings range, together with the WTR series unidirectional banjo male elbow flow regulator with handle regulation WTRFR and the WTR series push-in swivel male elbow BSPT, BSPP, metric, NPT and UNF thread WTRL-R / WTRL-G / WTRL-N.
The materials listed in the catalogue for the series are:
Products compliant with REACH 1907/2006 and RoHS 2011/65/EU.
Compatible with polyamide PA, polyurethane PU and polyethylene PE tubes, such as the PUES polyurethane pneumatic tubing. To connect correctly, cut the tube off square (90°), insert it up to the end stop and pull back gently to check it is connected. A damaged, scratched or oval tube can cause air leakage or tube release. The OD of polyurethane tube expands with pressure: check it and renew the tube if the expansion is out of tolerance.
To disconnect, make sure the system pressure is zero, press the release sleeve towards the fitting with one hand and pull the tube away with the other; always cut back the section of tube previously inserted before reinserting it, using a proper tube cutter.
| Tube Ø (mm) | 4 | 6 | 8 | 10 | 12 |
|---|---|---|---|---|---|
| Tolerance (mm) | ±0.1 | ±0.1 | ±0.1 | ±0.15 | ±0.15 |
| Tube Ø (inch) | 5/32 | 1/4 | 5/16 | 3/8 | 1/2 |
|---|---|---|---|---|---|
| Tolerance (inch) | ±0.003 | ±0.003 | ±0.003 | ±0.005 | ±0.005 |
| Feature | Value / Specification |
|---|---|
| Series | Tierre WTR – flow regulators |
| Operating temperature | -20 °C to 80 °C |
| Working pressure | 10 bar |
| Fluids | Compressed air |
| Metric tube (ØD) | from 4 to 12 mm |
| Inch tube (ØD) | from 5/32″ to 1/2″ |
| Compatible tubes | Polyamide PA, polyurethane PU, polyethylene PE |
| Body | Nickel-plated brass and PBT |
| Compliance | REACH 1907/2006, RoHS 2011/65/EU |
WTRNSF – Flat flow regulators metric sizes unidirectional nickel plated with handle regulation
| Code | ØD | Ød | A | B | E | GR. |
|---|---|---|---|---|---|---|
| WTRNSF04 | 4 | 3.2 | 14.0 | 28.8 | 39.5 | 11.7 |
| WTRNSF06 | 6 | 4.3 | 20.0 | 42.6 | 47.6 | 27.0 |
| WTRNSF08 | 8 | 4.3 | 22.0 | 44.3 | 52.6 | 39.5 |
| WTRNSF10 | 10 | 4.3 | 26.0 | 53.4 | 60.5 | 69.0 |
| WTRNSF12 | 12 | 4.3 | 32.0 | 55.6 | 74.2 | 113.2 |
WTRNSF-N – Flat flow regulators imperial sizes unidirectional nickel plated with handle regulation
| Code | ØD | Ød | A | B | E | GR. |
|---|---|---|---|---|---|---|
| WTRNSF532 | 5/32 | 0.125 | 0.551 | 1.133 | 1.555 | 0.025 |
| WTRNSF316 | 3/16 | 0.125 | 0.551 | 1.133 | 1.578 | 0.056 |
| WTRNSF1-4 | 1/4 | 0.169 | 0.787 | 1.677 | 1.874 | 0.059 |
| WTRNSF516 | 5/16 | 0.169 | 0.866 | 1.744 | 2.070 | 0.087 |
| WTRNSF38 | 3/8 | 0.169 | 1.023 | 2.102 | 2.381 | 0.152 |
| WTRNSF1-2 | 1/2 | 0.169 | 1.259 | 2.188 | 2.921 | 0.249 |
Dimensions refer to the technical drawing in the downloadable PDF data sheet; GR. is the weight in grams, LB in pounds.
Technical data from the catalogue Tierre WTR Series push-in fittings, ed. 1.0 07/2019.