Search
Products

Fluidfit push-in union elbow with stem – HLJ – Tierre

The Tierre HLJ Fluidfit push-in union elbow with stem has a POM acetal resin body and EPDM o-ring and is designed for water, beverages, vacuum, compressed air and gases or liquids suitable with the materials: it works from -750 mmHg up to 20 bar, depending on tube and temperature, from 1 to 98 °C with air and fluids (from -20 °C with dry air). Available for metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″.

Available product codes: HLJ0404B, HLJ0606B, HLJ0808B, HLJ1010B, HLJ1212B, HLJ1515B, HLJ2222B, HLJ1006B, HLJ1008B, HLJ0608B, HLJ5/32-5/32G, HLJ3/16-3/16G, HLJ1/4-1/4G, HLJ5/16-5/16G, HLJ3/8-3/8G, HLJ1/2-1/2G, HLJ3/8-1/4G, HLJ3/8-5/16G, HLJ1/4-5/16G, HLJ1/4-06G, HLJ3/8-06G.

Download

Catalogs and technical documentation

Fluidfit push-in union elbow with stem – HLJ – Tierre

Description

Features and application

The Tierre HLJ Fluidfit push-in union elbow with stem is an elbow fitting with a stem on one side and a push-in connection for the tube on the other, also in reduced and enlarged versions.

It combines the catalogue versions: HLJ – Union elbow tube with stem (metric tube); HLJ – Union elbow tube with stem (inch tube).

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses. In the code, the final letter B stands for the black (metric) version and G for the grey (inch) version.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit push-in reducer with stem HGJ and the Fluidfit push-in branch tee with stem HTJ.

Materials

  • Body: POM acetal resin
  • Cover: POM acetal resin
  • Gripping collet: POM and AISI 301 stainless steel
  • O-ring: EPDM

Technical data

Feature Value / Specification
Fluids Water, beverages, vacuum, compressed air, gases and liquids suitable with the construction materials
Working temperature From -20 °C to 98 °C with dry air; from 1 °C to 98 °C with air and fluids
Working pressure From -750 mmHg up to 20 bar, depending on the tubes and temperatures applied
Plastic tubes Polyethylene (PE), polyamide (PA), polyurethane (PU), PTFE, FEP
Soft metal tubes Brass, copper, mild steel, aluminium
Hard metal tubes With a groove made according to the catalogue dimensions
Tube (ØD) Metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″

Working pressures by diameter and temperature

Tube Ø -20 °C 1 °C 25 °C 70 °C
4 mm – 5/32″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
6 mm – 3/16″ – 1/4″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
8 mm – 5/16″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
10 mm – 3/8″ -750 mmHg → 16 bar -750 mmHg → 16 bar -750 mmHg → 14 bar -750 mmHg → 10 bar
12 mm – 1/2″ -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
15 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
22 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar

With 10 mm – 3/8″ tube at 98 °C: 0 to 8 bar with dry air only. System performance always depends on the fittings, tubes and accessories used, and the limits given refer to systems assembled with the HCP locking clip installed.

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

HLJ – Union elbow tube with stem (metric tube)

Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ0404B 4 4 13.2 18.0 14.7 30.1 21.9 2.5 100
HLJ0606B 6 6 15.5 21.0 16.1 34.8 25.1 3.7 100
HLJ0808B 8 8 17.6 22.5 17.5 38.3 27.7 5.3 50
HLJ1010B 10 10 20.0 24.8 20.1 43.2 31.3 7.4 50
HLJ1212B 12 12 23.6 29.5 24.7 51.2 39.0 12.6 25
HLJ1515B 15 15 28.0 35.0 29.4 61.3 48.5 21.7 20
HLJ2222B 22 22 35.5 41.0 33.8 75.5 58.0 38.9 20

Reduction

Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ1006B 10 6 20.0 24.8 16.1 43.2 30.6 7.8 50
HLJ1008B 10 8 20.0 24.8 17.5 43.2 31.0 8.2 50

Enlarger

Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ0608B 6 8 17.6 21.0 17.5 36.8 26.0 4.7 100

HLJ – Union elbow tube with stem (inch tube)

Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ5/32-5/32G 5/32 5/32 13.2 18.0 14.7 30.1 21.9 2.5 100
HLJ3/16-3/16G 3/16 3/16 13.8 18.5 15.0 31.4 22.5 2.9 100
HLJ1/4-1/4G 1/4 1/4 15.5 21.0 16.9 34.8 25.1 3.7 100
HLJ5/16-5/16G 5/16 5/16 17.6 22.5 17.5 38.3 27.7 5.4 50
HLJ3/8-3/8G 3/8 3/8 20.0 24.8 20.2 43.2 31.4 7.9 50
HLJ1/2-1/2G 1/2 1/2 23.6 29.5 25.1 51.2 39.2 12.7 25

Reduction

Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ3/8-1/4G 3/8 1/4 15.5 24.8 16.9 38.6 25.1 4.5 50
HLJ3/8-5/16G 3/8 5/16 20.0 24.8 17.5 43.2 31.0 8.1 50

Enlarger

Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ1/4-5/16G 1/4 5/16 17.6 21.0 17.5 36.8 25.7 4.5 50
Code ØD1 ØD2 ØP A B E L Weight (g) Pcs/pack
HLJ1/4-06G 1/4 06 15.5 21.0 16.1 34.8 24.1 3.8 100
HLJ3/8-06G 3/8 06 15.5 24.8 16.1 38.6 25.1 4.5 50

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO