The Tierre HULP Fluidfit push-in Steelfit union elbow has a POM acetal resin body and EPDM o-ring and is designed to connect stainless steel tubing: it works from -750 mmHg up to 20 bar, depending on tube and temperature, from 1 to 98 °C with air and fluids (from -20 °C with dry air). Available for inch tubes from 1/4″ to 1/2″.
Available product codes: HULP5/16-5/16G, HULP3/8-3/8G, HULP1/2-1/2G, HULP1/4-5/16G, HULP1/4-3/8G, HULP5/16-3/8G, HULP3/8-5/16G.
The Tierre HULP Fluidfit push-in Steelfit union elbow is a union elbow with a Steelfit connection for stainless steel tube on one side (ØD1) and a push-in connection for standard tube on the other (ØD2).
Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses. In the code, the final letter B stands for the black (metric) version and G for the grey (inch) version.
It is part of the Tierre Fluidfit fittings range, together with the Fluidfit push-in Steelfit union connector HUCP and the Fluidfit push-in union elbow with double Steelfit connections HULS.
| Feature | Value / Specification |
|---|---|
| Fluids | Water, beverages, vacuum, compressed air, gases and liquids suitable with the construction materials |
| Working temperature | From -20 °C to 98 °C with dry air; from 1 °C to 98 °C with air and fluids |
| Working pressure | From -750 mmHg up to 20 bar, depending on the tubes and temperatures applied |
| Steelfit connection | Stainless steel tubing |
| Plastic tubes | Polyethylene (PE), polyamide (PA), polyurethane (PU), PTFE, FEP |
| Soft metal tubes | Brass, copper, mild steel, aluminium |
| Hard metal tubes | With a groove made according to the catalogue dimensions |
| Tube (ØD) | Inch tubes from 1/4″ to 1/2″ |
| Tube Ø | -20 °C | 1 °C | 25 °C | 70 °C |
|---|---|---|---|---|
| 4 mm – 5/32″ | -750 mmHg → 20 bar | -750 mmHg → 20 bar | -750 mmHg → 16 bar | -750 mmHg → 10 bar |
| 6 mm – 3/16″ – 1/4″ | -750 mmHg → 20 bar | -750 mmHg → 20 bar | -750 mmHg → 16 bar | -750 mmHg → 10 bar |
| 8 mm – 5/16″ | -750 mmHg → 20 bar | -750 mmHg → 20 bar | -750 mmHg → 16 bar | -750 mmHg → 10 bar |
| 10 mm – 3/8″ | -750 mmHg → 16 bar | -750 mmHg → 16 bar | -750 mmHg → 14 bar | -750 mmHg → 10 bar |
| 12 mm – 1/2″ | -750 mmHg → 14 bar | -750 mmHg → 14 bar | -750 mmHg → 8 bar | -750 mmHg → 6 bar |
| 15 mm | -750 mmHg → 14 bar | -750 mmHg → 14 bar | -750 mmHg → 8 bar | -750 mmHg → 6 bar |
| 22 mm | -750 mmHg → 14 bar | -750 mmHg → 14 bar | -750 mmHg → 8 bar | -750 mmHg → 6 bar |
With 10 mm – 3/8″ tube at 98 °C: 0 to 8 bar with dry air only. System performance always depends on the fittings, tubes and accessories used, and the limits given refer to systems assembled with the HCP locking clip installed.
Cut the tube square with a proper tube cutter (do not use a hacksaw) and deburr the end. Unscrew the nut by hand anticlockwise by two turns, insert the tube up to the end stop, then keep it in position and screw the nut by hand clockwise up to the fully screwed position: this grants the seal and the full grip of the tube. To disconnect, unscrew the nut by two turns, push the collet towards the body and pull the tube.
HULP – Union elbow (metric tube)
| Code | ØD1 (STEELFIT) | ØD2 | ØP1 | ØP2 | B1 | B2 | L1 | L2 | Weight (g) | Pcs/pack |
|---|---|---|---|---|---|---|---|---|---|---|
| HULP5/16-5/16G | 5/16 | 5/16 | 19.3 | 20.0 | 21.1 | 17.5 | 35.1 | 35.8 | 11.5 | 50 |
| HULP3/8-3/8G | 3/8 | 3/8 | 22.3 | 20.0 | 23.8 | 20.2 | 37.0 | 39.5 | 12.7 | 50 |
| HULP1/2-1/2G | 1/2 | 1/2 | 27.5 | 23.6 | 29.0 | 25.1 | 46.4 | 48.3 | 21.2 | 25 |
| Code | ØD1 (STEELFIT) | ØD2 | ØP1 | ØP2 | B1 | B2 | L1 | L2 | Weight (g) | Pcs/pack |
|---|---|---|---|---|---|---|---|---|---|---|
| HULP1/4-5/16G | 1/4 | 5/16 | 19.3 | 20.0 | 19.7 | 17.5 | 35.1 | 35.3 | 11.2 | 50 |
| HULP1/4-3/8G | 1/4 | 3/8 | 19.3 | 20.0 | 19.7 | 20.2 | 35.5 | 35.3 | 11.0 | 50 |
| HULP5/16-3/8G | 5/16 | 3/8 | 19.3 | 20.0 | 21.1 | 20.2 | 35.5 | 35.8 | 10.6 | 50 |
| HULP3/8-5/16G | 3/8 | 5/16 | 22.3 | 20.0 | 23.8 | 17.5 | 36.6 | 39.5 | 12.8 | 50 |
Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.
Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.