Search
Products

PA66 push-in swivel male branch tee BSPT and BSPP thread – MPT / MPT-G – Tierre

The Tierre M series MPT / MPT-G PA66 push-in swivel male branch tee is a compact, lightweight fitting for compressed air, vacuum and industrial water, for tubes from 4 to 12 mm, with male BSPT taper thread (ISO 7) with pre-applied PTFE sealant from R1/8″ to R1/2″ and BSPP parallel thread (ISO 228) with O-ring from G1/8″ to G1/2″. Working pressure up to 20 bar.

Available product codes: MPT04R01W, MPT04R02W, MPT04R03W, MPT06R01W, MPT06R02W, MPT06R03W, MPT08R01W, MPT08R02W, MPT08R03W, MPT08R04W, MPT10R02W, MPT10R03W, MPT10R04W, MPT12R02W, MPT12R03W, MPT12R04W, MPT04G01W, MPT04G02W, MPT04G03W, MPT04G04W, MPT06G01W, MPT06G02W, MPT06G03W, MPT06G04W, MPT08G01W, MPT08G02W, MPT08G03W, MPT08G04W, MPT10G01W, MPT10G02W, MPT10G03W, MPT10G04W, MPT12G01W, MPT12G02W, MPT12G03W, MPT12G04W.

Description

How it works and applications

The Tierre M series PA66 push-in swivel male branch tee BSPT and BSPP thread MPT / MPT-G is a swivel male branch tee: two push-in connections on the sides and a male threaded connection in the centre. It combines the two catalogue versions: MPT with BSPT taper thread and MPT-G with BSPP parallel thread.

M series push-in fittings are compact and extremely lightweight, provide an excellent vacuum seal and can also be used with water in industrial applications. The white PA66 body makes them suitable for robotics in the medical and pharmaceutical sectors, and the range of diameters is designed to optimise flow passages.

The fitting is part of the Tierre M series push-in fittings range, together with the PA66 push-in swivel male elbow BSPT and BSPP thread MPL / MPL-G and the PA66 push-in union tee MPUT.

Construction and materials

The materials listed in the catalogue for the M series are:

  • Body: nickel-plated brass and PA66
  • O-ring: NBR
  • Spacer: PA66 and POM (MPC and MPC-G)
  • Seals: NBR
  • Gripping ring: AISI 301 stainless steel
  • Collar: PA66
  • Release ring: PA66

The products comply with REACH 1907/2006 and RoHS2 2011/65/EU and are silicone free, so they are 100% compatible with adhesives and paints.

Threads and sizes available

Available with BSPT taper thread (ISO 7) with pre-applied PTFE sealant from R1/8″ to R1/2″ and BSPP parallel thread (ISO 228) with O-ring from G1/8″ to G1/2″, for tubes from 4 to 12 mm. The combinations listed in the catalogue are:

Tube Ø (mm) Available threads
4 R1/8, R1/4, R3/8, G1/8, G1/4, G3/8, G1/2
6 R1/8, R1/4, R3/8, G1/8, G1/4, G3/8, G1/2
8 R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, G1/2
10 R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, G1/2
12 R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, G1/2

Maximum tightening torque given in the catalogue:

Thread Max torque (Nm)
R1/8 7
R1/4 12
R3/8 22
R1/2 28
G1/8 10
G1/4 15
G3/8 25
G1/2 40

Connecting and disconnecting the tube

Compatible with polyamide, polyurethane, polyethylene, FEP and PTFE tubes, such as the PUES polyurethane pneumatic tubing. To connect correctly:

  1. cut the tube at 90° with a suitable tube cutter;
  2. push it fully in, up to the stop;
  3. pull it gently to check that it is locked.

A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. The outside diameter of polyurethane tube expands with pressure: check it and replace the tube if the expansion has damaged it. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.

Tube Ø (mm) Outside diameter tolerance (mm)
4 ±0.1
6 ±0.1
8 ±0.1
10 ±0.1
12 ±0.15

Technical summary

Feature Value / Specification
Series Tierre M series
Fluids Compressed air, vacuum and water for industrial applications
Operating temperature -20 °C to 80 °C with dry air; 1 °C to 80 °C with air, vacuum and water for industrial applications
Working pressure 20 bar (pressure peaks must not exceed the maximum working pressure)
Vacuum -750 mmHg (-0.999 bar)
Thread BSPT taper thread (ISO 7) with pre-applied PTFE sealant from R1/8″ to R1/2″ and BSPP parallel thread (ISO 228) with O-ring from G1/8″ to G1/2″
Tube Ø from 4 to 12 mm
Compatible tubes Polyamide, polyurethane, polyethylene, FEP, PTFE
Body material (M series data) Nickel-plated brass and PA66
Compliance REACH 1907/2006, RoHS2 2011/65/EU, silicone free

Product codes

MPT – Swivel male branch tee BSPT taper

Code ØD ØP T L E A B H DN GR. BOX
MPT04R01W 4 9.3 R1/8 18.7 15.6 7.0 12.9 10 3.5 7.4 100
MPT04R02W 4 9.3 R1/4 21.7 15.6 10.0 12.9 14 3.5 13.3 100
MPT04R03W 4 9.3 R3/8 21.7 15.6 10.0 12.9 17 3.5 19.8 50
MPT06R01W 6 11.5 R1/8 20.0 17.3 7.0 14.9 12 3.5 8.4 50
MPT06R02W 6 11.5 R1/4 23.0 17.3 10.0 14.9 14 3.5 14.4 50
MPT06R03W 6 11.5 R3/8 23.0 17.3 10.0 14.9 17 3.5 20.8 50
MPT08R01W 8 13.6 R1/8 21.8 21.2 7.0 16.9 14 4.0 7.9 50
MPT08R02W 8 13.6 R1/4 24.8 21.2 10.0 16.9 14 4.0 14.7 50
MPT08R03W 8 13.6 R3/8 24.8 21.2 10.0 16.9 17 4.0 21.2 50
MPT08R04W 8 13.6 R1/2 27.3 21.2 13.0 16.9 21 4.0 36.1 25
MPT10R02W 10 16.4 R1/4 26.8 24.6 10.0 24.7 17 9.0 16.4 25
MPT10R03W 10 16.4 R3/8 26.8 24.6 10.0 24.7 17 9.0 22.0 25
MPT10R04W 10 16.4 R1/2 29.8 24.6 13.0 24.7 21 9.0 35.9 25
MPT12R02W 12 19.5 R1/4 28.5 28.7 10.0 28.3 19 9.8 20.2 25
MPT12R03W 12 19.5 R3/8 28.5 28.7 10.0 28.3 19 9.8 25.8 25
MPT12R04W 12 19.5 R1/2 31.5 28.7 13.0 28.3 21 9.8 39.7 20

MPT-G – Swivel male branch tee BSPP parallel

Code ØD ØP T L E A B H DN GR. BOX
MPT04G01W 4 9.3 G1/8 16.7 15.6 5.0 12.9 14 3.5 8.9 100
MPT04G02W 4 9.3 G1/4 18.7 15.6 6.5 12.9 17 3.5 14.1 100
MPT04G03W 4 9.3 G3/8 18.2 15.6 6.5 12.9 20 3.5 19.8 50
MPT04G04W 4 9.3 G1/2 19.7 15.6 8.0 12.9 24 3.5 32.4 50
MPT06G01W 6 11.5 G1/8 18.0 17.3 5.0 14.9 14 4.0 9.9 50
MPT06G02W 6 11.5 G1/4 20.0 17.3 6.5 14.9 17 4.0 15.2 50
MPT06G03W 6 11.5 G3/8 19.5 17.3 6.5 14.9 20 4.0 20.9 50
MPT06G04W 6 11.5 G1/2 21.0 17.3 8.0 14.9 24 4.0 33.5 50
MPT08G01W 8 13.6 G1/8 21.8 21.2 5.0 16.9 14 6.0 11.9 50
MPT08G02W 8 13.6 G1/4 21.8 21.2 6.5 16.9 17 6.0 16.0 50
MPT08G03W 8 13.6 G3/8 21.3 21.2 6.5 16.9 20 6.0 21.0 50
MPT08G04W 8 13.6 G1/2 22.8 21.2 8.0 16.9 24 6.0 33.2 25
MPT10G01W 10 16.4 G1/8 23.3 24.6 5.0 24.7 14 9.0 16.4 25
MPT10G02W 10 16.4 G1/4 24.7 24.6 6.5 24.7 17 9.0 19.0 25
MPT10G03W 10 16.4 G3/8 22.8 24.6 6.5 24.7 20 9.0 22.5 25
MPT10G04W 10 16.4 G1/2 24.3 24.6 8.0 24.7 24 9.0 33.0 25
MPT12G01W 12 19.5 G1/8 25.0 28.7 5.0 28.3 17 9.6 19.5 25
MPT12G02W 12 19.5 G1/4 26.4 28.7 6.5 28.3 17 9.6 22.1 25
MPT12G03W 12 19.5 G3/8 24.5 28.7 6.5 28.3 20 9.6 25.6 25
MPT12G04W 12 19.5 G1/2 26.0 28.7 8.0 28.3 24 9.6 36.1 20

Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet; GR. and BOX are given as in the catalogue.

Technical data from the catalogue Tierre Innesti rapidi Serie M, ed. 1.0 01/2019.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO