The Tierre M series MPUT PA66 push-in union tee is a compact, lightweight fitting for compressed air, vacuum and industrial water, for tubes from 4 to 12 mm. Working pressure up to 20 bar.
Available product codes: MPUT04W, MPUT06W, MPUT08W, MPUT10W, MPUT12W.
The Tierre M series PA66 push-in union tee MPUT is a union tee with three push-in connections, to branch a line by joining three tubes of the same diameter.
M series push-in fittings are compact and extremely lightweight, provide an excellent vacuum seal and can also be used with water in industrial applications. The white PA66 body makes them suitable for robotics in the medical and pharmaceutical sectors, and the range of diameters is designed to optimise flow passages.
The fitting is part of the Tierre M series push-in fittings range, together with the PA66 push-in union elbow MPUL and the PA66 push-in union Y MPY.
The materials listed in the catalogue for the M series are:
The products comply with REACH 1907/2006 and RoHS2 2011/65/EU and are silicone free, so they are 100% compatible with adhesives and paints.
Available for tubes with outside diameter 4 mm, 6 mm, 8 mm, 10 mm, 12 mm.
Compatible with polyamide, polyurethane, polyethylene, FEP and PTFE tubes, such as the PUES polyurethane pneumatic tubing. To connect correctly:
A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. The outside diameter of polyurethane tube expands with pressure: check it and replace the tube if the expansion has damaged it. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.
| Tube Ø (mm) | Outside diameter tolerance (mm) |
|---|---|
| 4 | ±0.1 |
| 6 | ±0.1 |
| 8 | ±0.1 |
| 10 | ±0.1 |
| 12 | ±0.15 |
| Feature | Value / Specification |
|---|---|
| Series | Tierre M series |
| Fluids | Compressed air, vacuum and water for industrial applications |
| Operating temperature | -20 °C to 80 °C with dry air; 1 °C to 80 °C with air, vacuum and water for industrial applications |
| Working pressure | 20 bar (pressure peaks must not exceed the maximum working pressure) |
| Vacuum | -750 mmHg (-0.999 bar) |
| Tube Ø | from 4 to 12 mm |
| Compatible tubes | Polyamide, polyurethane, polyethylene, FEP, PTFE |
| Body material (M series data) | Nickel-plated brass and PA66 |
| Compliance | REACH 1907/2006, RoHS2 2011/65/EU, silicone free |
| Code | ØD | ØP | L | E | ØC | B | M1 | M2 | DN | GR. | BOX |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MPUT04W | 4 | 9.3 | 15.5 | 15.5 | 3.2 | 12.9 | 6.3 | 12.6 | 3.5 | 2.6 | 100 |
| MPUT06W | 6 | 11.5 | 18.9 | 18.9 | 3.2 | 14.9 | 7.4 | 14.8 | 5.0 | 4.2 | 50 |
| MPUT08W | 8 | 13.6 | 21.9 | 21.9 | 3.2 | 16.9 | 8.4 | 16.8 | 7.0 | 5.8 | 50 |
| MPUT10W | 10 | 16.4 | 25.1 | 25.1 | 4.2 | 24.7 | 10.3 | 20.6 | 9.0 | 9.5 | 25 |
| MPUT12W | 12 | 19.5 | 28.8 | 28.8 | 4.2 | 28.3 | 11.9 | 23.8 | 11.0 | 14.9 | 25 |
Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet; GR. and BOX are given as in the catalogue.
Technical data from the catalogue Tierre Innesti rapidi Serie M, ed. 1.0 01/2019.