Download
Catalogs and technical documentation
AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread – XVRL-R / XVRL-G – Tierre
The Tierre XVR series XVRL-R / XVRL-G AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread has an AISI 316L stainless steel body and collet and is suitable for aggressive environments, critical operating conditions and food contact applications. For compressed air, vacuum, water and fluids compatible with its materials, for tubes from 4 to 12 mm, with BSPT taper thread (ISO 7) from R1/8″ to R1/2″, BSPP parallel thread (ISO 228) from G1/8″ to G1/2″ and metric thread (ISO 262) M5. Working pressure up to 20 bar.
Available product codes: XVRL04R01, XVRL04R02, XVRL06R01, XVRL06R02, XVRL08R01, XVRL08R02, XVRL08R03, XVRL10R02, XVRL10R03, XVRL12R02, XVRL12R03, XVRL12R04, XVRL04M5, XVRL04G01, XVRL04G02, XVRL06M5, XVRL06G01, XVRL06G02, XVRL08G01, XVRL08G02, XVRL08G03, XVRL10G02, XVRL10G03, XVRL12G02, XVRL12G03, XVRL12G04.
AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread – XVRL-R / XVRL-G – Tierre
The Tierre XVR series XVRL-R / XVRL-G AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread is a swivel male elbow, with a threaded connection and a push-in connection for the tube. It combines the two catalogue versions: XVRL-R with BSPT taper thread and XVRL-G with BSPP parallel or metric thread.
XVR series push-in fittings have an AISI 316L stainless steel body and collet. The catalogue describes them as suitable for aggressive environments and critical operating conditions and for food contact applications, with an optimised compact design. Customised products can be developed on specific request.
The fitting is part of the Tierre XVR series AISI 316L stainless steel push-in fittings range, together with the AISI 316L stainless steel push-in fitting straight male BSPT and BSPP thread XVRC-R / XVRC-G and the AISI 316L stainless steel push-in swivel male branch tee BSPT and BSPP thread XVRT-R / XVRT-G.
The materials listed in the catalogue for the XVR series are:
The products comply with REACH 1907/2006 and EU directive 2015/863.
Available with BSPT taper thread (ISO 7) from R1/8″ to R1/2″, BSPP parallel thread (ISO 228) from G1/8″ to G1/2″ and metric thread (ISO 262) M5, for tubes from 4 to 12 mm. The combinations listed in the catalogue are:
| Tube Ø (mm) | Available threads |
|---|---|
| 4 | R1/8″, R1/4″, M5x0.8, G1/8″, G1/4″ |
| 6 | R1/8″, R1/4″, M5x0.8, G1/8″, G1/4″ |
| 8 | R1/8″, R1/4″, R3/8″, G1/8″, G1/4″, G3/8″ |
| 10 | R1/4″, R3/8″, G1/4″, G3/8″ |
| 12 | R1/4″, R3/8″, R1/2″, G1/4″, G3/8″, G1/2″ |
Tightening torque given in the catalogue:
| Thread | Torque (Nm) |
|---|---|
| R1/8″ | 2.5 |
| R1/4″ | 3.5 |
| R3/8″ | 6 |
| R1/2″ | 12 |
| G1/8″ | 1.2 |
| G1/4″ | 1.5 |
| G3/8″ | 2.5 |
| G1/2″ | 3.5 |
| M5x0.8 | 0.8 |
Compatible with polyamide PA, polyethylene PE, FEP, PTFE and grooved stainless steel tubes. With metal tubes the tube ends must be deburred, to avoid cuts or other damage to the O-rings. For grooved stainless steel tubes the catalogue gives these dimensions:
| Tube Ø (mm) | L (mm) | A (mm) |
|---|---|---|
| 4 | 7.6 | 0.23 |
| 6 | 8.0 | 0.23 |
| 8 | 9.0 | 0.23 |
| 10 | 11.0 | 0.23 |
| 12 | 12.7 | 0.23 |
To connect correctly:
A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.
| Tube Ø (mm) | Outside diameter tolerance (mm) | Insertion length (mm) |
|---|---|---|
| 4 | ±0.1 | 14 |
| 6 | ±0.1 | 15.5 |
| 8 | ±0.1 | 17.5 |
| 10 | ±0.15 | 19 |
| 12 | ±0.15 | 21 |
| Feature | Value / Specification |
|---|---|
| Series | Tierre XVR series AISI 316L stainless steel |
| Fluids | Compressed air, vacuum, water and fluids suitable for the construction materials |
| Operating temperature | -20 °C to 150 °C |
| Working pressure | 20 bar |
| Vacuum | -0.95 bar (-99 kPa) |
| Thread | BSPT taper thread (ISO 7) from R1/8″ to R1/2″, BSPP parallel thread (ISO 228) from G1/8″ to G1/2″ and metric thread (ISO 262) M5 |
| Tube Ø | from 4 to 12 mm |
| Compatible tubes | Polyamide PA, polyethylene PE, FEP, PTFE, grooved stainless steel |
| Body and collet | AISI 316L stainless steel |
| Compliance | REACH 1907/2006, EU 2015/863 |
XVRL-R – Swivel male elbow BSPT taper
| Code | ØD | T | ØP | A | L1 | L2 | CH |
|---|---|---|---|---|---|---|---|
| XVRL04R01 | 4 | R1/8″ | 10 | 8 | 19.5 | 20.5 | 13 |
| XVRL04R02 | 4 | R1/4″ | 10 | 10 | 19.5 | 23 | 14 |
| XVRL06R01 | 6 | R1/8″ | 12 | 8 | 21 | 20.5 | 13 |
| XVRL06R02 | 6 | R1/4″ | 12 | 10 | 21 | 23 | 14 |
| XVRL08R01 | 8 | R1/8″ | 14 | 8 | 23 | 20.5 | 14 |
| XVRL08R02 | 8 | R1/4″ | 14 | 10 | 23 | 23 | 14 |
| XVRL08R03 | 8 | R3/8″ | 14 | 11 | 23 | 24.5 | 17 |
| XVRL10R02 | 10 | R1/4″ | 16 | 10 | 26 | 25.5 | 16 |
| XVRL10R03 | 10 | R3/8″ | 16 | 11 | 26 | 27 | 17 |
| XVRL12R02 | 12 | R1/4″ | 19 | 10 | 31 | 28 | 20 |
| XVRL12R03 | 12 | R3/8″ | 19 | 11 | 31 | 28.5 | 20 |
| XVRL12R04 | 12 | R1/2″ | 19 | 14 | 31 | 31.5 | 22 |
XVRL-G – Swivel male elbow BSPP parallel & metric
| Code | ØD | T | ØP | ØC | A | L1 | L2 | CH |
|---|---|---|---|---|---|---|---|---|
| XVRL04M5 | 4 | M5x0.8 | 10 | 7 | 4 | 18 | 16.5 | 8 |
| XVRL04G01 | 4 | G1/8″ | 10 | 13 | 5.5 | 19.5 | 19 | 13 |
| XVRL04G02 | 4 | G1/4″ | 10 | 16 | 6.5 | 19.5 | 21.5 | 16 |
| XVRL06M5 | 6 | M5x0.8 | 12 | 7 | 4 | 21 | 16.5 | 8 |
| XVRL06G01 | 6 | G1/8″ | 12 | 13 | 5.5 | 21 | 19 | 13 |
| XVRL06G02 | 6 | G1/4″ | 12 | 16 | 6.5 | 21 | 21 | 16 |
| XVRL08G01 | 8 | G1/8″ | 14 | 13 | 5.5 | 23 | 19 | 13 |
| XVRL08G02 | 8 | G1/4″ | 14 | 16 | 6.5 | 23 | 21 | 16 |
| XVRL08G03 | 8 | G3/8″ | 14 | 20 | 7.5 | 23 | 23 | 20 |
| XVRL10G02 | 10 | G1/4″ | 16 | 16 | 6.5 | 26 | 23 | 16 |
| XVRL10G03 | 10 | G3/8″ | 16 | 20 | 7.5 | 26 | 26 | 20 |
| XVRL12G02 | 12 | G1/4″ | 19 | 16 | 6.5 | 31 | – | – |
| XVRL12G03 | 12 | G3/8″ | 19 | 20 | 7.5 | 31 | 29 | 20 |
| XVRL12G04 | 12 | G1/2″ | 19 | 25 | 9 | 31 | 29 | 25 |
Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet.
Technical data from the catalogue Tierre Serie XVR Inox AISI 316L, ed. 1.2 08/2020.