Search
Products

AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread – XVRL-R / XVRL-G – Tierre

The Tierre XVR series XVRL-R / XVRL-G AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread has an AISI 316L stainless steel body and collet and is suitable for aggressive environments, critical operating conditions and food contact applications. For compressed air, vacuum, water and fluids compatible with its materials, for tubes from 4 to 12 mm, with BSPT taper thread (ISO 7) from R1/8″ to R1/2″, BSPP parallel thread (ISO 228) from G1/8″ to G1/2″ and metric thread (ISO 262) M5. Working pressure up to 20 bar.

Available product codes: XVRL04R01, XVRL04R02, XVRL06R01, XVRL06R02, XVRL08R01, XVRL08R02, XVRL08R03, XVRL10R02, XVRL10R03, XVRL12R02, XVRL12R03, XVRL12R04, XVRL04M5, XVRL04G01, XVRL04G02, XVRL06M5, XVRL06G01, XVRL06G02, XVRL08G01, XVRL08G02, XVRL08G03, XVRL10G02, XVRL10G03, XVRL12G02, XVRL12G03, XVRL12G04.

Description

How it works and applications

The Tierre XVR series XVRL-R / XVRL-G AISI 316L stainless steel push-in swivel male elbow BSPT and BSPP thread is a swivel male elbow, with a threaded connection and a push-in connection for the tube. It combines the two catalogue versions: XVRL-R with BSPT taper thread and XVRL-G with BSPP parallel or metric thread.

XVR series push-in fittings have an AISI 316L stainless steel body and collet. The catalogue describes them as suitable for aggressive environments and critical operating conditions and for food contact applications, with an optimised compact design. Customised products can be developed on specific request.

The fitting is part of the Tierre XVR series AISI 316L stainless steel push-in fittings range, together with the AISI 316L stainless steel push-in fitting straight male BSPT and BSPP thread XVRC-R / XVRC-G and the AISI 316L stainless steel push-in swivel male branch tee BSPT and BSPP thread XVRT-R / XVRT-G.

Materials

The materials listed in the catalogue for the XVR series are:

  • Body: AISI 316L stainless steel
  • Collet: AISI 316L stainless steel
  • Spacer: PVDF-UHM compliant with the FDA directive
  • O-ring: FKM certified NSF/ANSI 61, compliant with the FDA directive
  • Seal: FKM certified NSF/ANSI 61, compliant with the FDA directive
  • Gripping ring: AISI 301 stainless steel
  • Collar: PVDF-UHM compliant with the FDA directive
  • Release ring for swivel systems: AISI 302 stainless steel

The products comply with REACH 1907/2006 and EU directive 2015/863.

Threads and sizes available

Available with BSPT taper thread (ISO 7) from R1/8″ to R1/2″, BSPP parallel thread (ISO 228) from G1/8″ to G1/2″ and metric thread (ISO 262) M5, for tubes from 4 to 12 mm. The combinations listed in the catalogue are:

Tube Ø (mm) Available threads
4 R1/8″, R1/4″, M5x0.8, G1/8″, G1/4″
6 R1/8″, R1/4″, M5x0.8, G1/8″, G1/4″
8 R1/8″, R1/4″, R3/8″, G1/8″, G1/4″, G3/8″
10 R1/4″, R3/8″, G1/4″, G3/8″
12 R1/4″, R3/8″, R1/2″, G1/4″, G3/8″, G1/2″

Tightening torque given in the catalogue:

Thread Torque (Nm)
R1/8″ 2.5
R1/4″ 3.5
R3/8″ 6
R1/2″ 12
G1/8″ 1.2
G1/4″ 1.5
G3/8″ 2.5
G1/2″ 3.5
M5x0.8 0.8

Compatible tubes and connection

Compatible with polyamide PA, polyethylene PE, FEP, PTFE and grooved stainless steel tubes. With metal tubes the tube ends must be deburred, to avoid cuts or other damage to the O-rings. For grooved stainless steel tubes the catalogue gives these dimensions:

Tube Ø (mm) L (mm) A (mm)
4 7.6 0.23
6 8.0 0.23
8 9.0 0.23
10 11.0 0.23
12 12.7 0.23

To connect correctly:

  1. cut the tube at 90° with a suitable tube cutter;
  2. push it fully in, up to the stop;
  3. pull it gently to check that it is locked.

A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.

Tube Ø (mm) Outside diameter tolerance (mm) Insertion length (mm)
4 ±0.1 14
6 ±0.1 15.5
8 ±0.1 17.5
10 ±0.15 19
12 ±0.15 21

Technical summary

Feature Value / Specification
Series Tierre XVR series AISI 316L stainless steel
Fluids Compressed air, vacuum, water and fluids suitable for the construction materials
Operating temperature -20 °C to 150 °C
Working pressure 20 bar
Vacuum -0.95 bar (-99 kPa)
Thread BSPT taper thread (ISO 7) from R1/8″ to R1/2″, BSPP parallel thread (ISO 228) from G1/8″ to G1/2″ and metric thread (ISO 262) M5
Tube Ø from 4 to 12 mm
Compatible tubes Polyamide PA, polyethylene PE, FEP, PTFE, grooved stainless steel
Body and collet AISI 316L stainless steel
Compliance REACH 1907/2006, EU 2015/863

Product codes

XVRL-R – Swivel male elbow BSPT taper

Code ØD T ØP A L1 L2 CH
XVRL04R01 4 R1/8″ 10 8 19.5 20.5 13
XVRL04R02 4 R1/4″ 10 10 19.5 23 14
XVRL06R01 6 R1/8″ 12 8 21 20.5 13
XVRL06R02 6 R1/4″ 12 10 21 23 14
XVRL08R01 8 R1/8″ 14 8 23 20.5 14
XVRL08R02 8 R1/4″ 14 10 23 23 14
XVRL08R03 8 R3/8″ 14 11 23 24.5 17
XVRL10R02 10 R1/4″ 16 10 26 25.5 16
XVRL10R03 10 R3/8″ 16 11 26 27 17
XVRL12R02 12 R1/4″ 19 10 31 28 20
XVRL12R03 12 R3/8″ 19 11 31 28.5 20
XVRL12R04 12 R1/2″ 19 14 31 31.5 22

XVRL-G – Swivel male elbow BSPP parallel & metric

Code ØD T ØP ØC A L1 L2 CH
XVRL04M5 4 M5x0.8 10 7 4 18 16.5 8
XVRL04G01 4 G1/8″ 10 13 5.5 19.5 19 13
XVRL04G02 4 G1/4″ 10 16 6.5 19.5 21.5 16
XVRL06M5 6 M5x0.8 12 7 4 21 16.5 8
XVRL06G01 6 G1/8″ 12 13 5.5 21 19 13
XVRL06G02 6 G1/4″ 12 16 6.5 21 21 16
XVRL08G01 8 G1/8″ 14 13 5.5 23 19 13
XVRL08G02 8 G1/4″ 14 16 6.5 23 21 16
XVRL08G03 8 G3/8″ 14 20 7.5 23 23 20
XVRL10G02 10 G1/4″ 16 16 6.5 26 23 16
XVRL10G03 10 G3/8″ 16 20 7.5 26 26 20
XVRL12G02 12 G1/4″ 19 16 6.5 31 – –
XVRL12G03 12 G3/8″ 19 20 7.5 31 29 20
XVRL12G04 12 G1/2″ 19 25 9 31 29 25

Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet.

Technical data from the catalogue Tierre Serie XVR Inox AISI 316L, ed. 1.2 08/2020.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO