The Tierre ASR-PU polyurethane push-lock hose is a push-lock hose with polyurethane inner and outer layers and high-strength textile reinforcement. Working pressure 10 to 13 bar depending on the size (see table), DN sizes from 1/4″ to 3/4″.
Available product codes: ASR-PU06, ASR-PU10, ASR-PU13, ASR-PU16, ASR-PU20, ASR-PU06NE, ASR-PU06AZ, ASR-PU06RO, ASR-PU06VD, ASR-PU10NE, ASR-PU10AZ, ASR-PU10RO, ASR-PU10VD, ASR-PU13NE, ASR-PU13AZ, ASR-PU13RO, ASR-PU13VD, ASR-PU16NE, ASR-PU16AZ, ASR-PU16RO, ASR-PU16VD, ASR-PU20NE, ASR-PU20AZ, ASR-PU20RO, ASR-PU20VD.
The Tierre ASR-PU polyurethane push-lock hose is a push-lock hose with polyurethane inner and outer layers and high-strength textile reinforcement. It resists abrasion, tearing, ozone and UV rays, and is suitable for robotics and automotive applications with air, water and gas.
It is part of the Tierre Push-Lock hoses and fittings range, together with the ASR and ASR-HH hoses. For connection the catalogue offers hose fittings in three materials: brass, such as the 3467 male BSPP hose fitting, steel, such as the 3470 swivel female hose fitting, and AISI 316L stainless steel, such as the SPHM stainless hose fitting.
Products compliant with REACH 1907/2006 and EU directive 2015/863.
Not allowed in braking systems or in highly dynamic pulsation systems; not recommended for fuels. The catalogue recommends using ASR-PU hoses only with Tierre hose fittings.
The catalogue data are based on tests carried out at an ambient temperature of +20 °C and are not binding: they depend on the application, the operating temperature and the life of the hose.
The push-lock system does not need a hose clamp. To assemble, according to the catalogue instructions:
To disassemble, cut the hose lengthwise from the plastic cap to the end of the hose fitting; then bend the hose to expose the fitting and pull it out.
| Feature | Value / Specification |
|---|---|
| Hose | Tierre push-lock ASR-PU |
| Operating temperature | -20 °C to +80 °C with air and water; ambient temperature -20 °C to +80 °C |
| Working pressure | 10 to 13 bar depending on the size (see table) |
| Fluids | Compressed air, industrial water and fluids compatible with the construction materials |
| DN | from 1/4″ to 3/4″ |
| Construction | polyurethane / high-strength textile layer / polyurethane |
| Compliance | REACH 1907/2006, EU 2015/863, 100% silicone free |
| Code | DN (inch) | DN (mm) | ID (mm) | OD (mm) | Min. bend radius (mm) | Working pressure at 20 °C (bar) | Vacuum (bar) | Weight (g/m) | Coil length (m) |
|---|---|---|---|---|---|---|---|---|---|
| ASR-PU06 | 1/4″ | 6 | 6.4 | 13 | 25 | 13 | 0.8 | 110 | 50 |
| ASR-PU10 | 3/8″ | 10 | 9.5 | 16 | 60 | 13 | 0.8 | 154 | 50 |
| ASR-PU13 | 1/2″ | 13 | 12.5 | 19 | 75 | 13 | 0.8 | 218 | 50 |
| ASR-PU16 | 5/8″ | 16 | 16.5 | 23 | 125 | 12 | 0.8 | 280 | 50 |
| ASR-PU20 | 3/4″ | 20 | 19.5 | 27 | 150 | 10 | 0.8 | 325 | 50 |
Codes by colour
| DN | Black | Light blue | Red | Green |
|---|---|---|---|---|
| 1/4″ (6) | ASR-PU06NE | ASR-PU06AZ | ASR-PU06RO | ASR-PU06VD |
| 3/8″ (10) | ASR-PU10NE | ASR-PU10AZ | ASR-PU10RO | ASR-PU10VD |
| 1/2″ (13) | ASR-PU13NE | ASR-PU13AZ | ASR-PU13RO | ASR-PU13VD |
| 5/8″ (16) | ASR-PU16NE | ASR-PU16AZ | ASR-PU16RO | ASR-PU16VD |
| 3/4″ (20) | ASR-PU20NE | ASR-PU20AZ | ASR-PU20RO | ASR-PU20VD |
Black is standard; the other colours are available on request and minimum quantity.
Technical data from the catalogue Tierre Push-Lock Hoses & Fittings, ed. 2.1 09/2021.