Search
Products

Synthetic rubber push-lock hose for water up to 120 °C – ASR-HH – Tierre

The Tierre ASR-HH synthetic rubber push-lock hose for water up to 120 °C is a synthetic rubber push-lock hose with high-strength textile reinforcement for higher temperatures: with water it works from 0 °C to +120 °C. Max working pressure 14 bar, DN sizes from 1/4″ to 5/8″.

Available product codes: ASR-HH06, ASR-HH10, ASR-HH13, ASR-HH16, ASR-HH06BL, ASR-HH06RO, ASR-HH10BL, ASR-HH10RO, ASR-HH13BL, ASR-HH13RO, ASR-HH16BL, ASR-HH16RO.

Description

Features and applications

The Tierre ASR-HH synthetic rubber push-lock hose for water up to 120 °C is a synthetic rubber push-lock hose with high-strength textile reinforcement for higher temperatures: with water it works from 0 °C to +120 °C. It is suitable for injection moulding and the automotive industry, for demineralised water up to 120 °C with corrosion inhibitor and air up to 75 °C.

  • high flexibility
  • high abrasion resistance
  • 100% silicone free
  • to be used without a hose clamp

It is part of the Tierre Push-Lock hoses and fittings range, together with the ASR and ASR-PU hoses. For connection the catalogue offers hose fittings in three materials: brass, such as the 3467 male BSPP hose fitting, steel, such as the 3470 swivel female hose fitting, and AISI 316L stainless steel, such as the SPHM stainless hose fitting.

Construction

  • Inner layer: synthetic rubber
  • Reinforcement: high-strength textile layer
  • Outer layer: high-performance synthetic rubber

Products compliant with REACH 1907/2006 and EU directive 2015/863.

Restrictions

Not allowed in braking systems or in highly dynamic pulsation systems; not recommended for fuels, hydraulic oils and lubricants. The catalogue recommends using ASR-HH hoses only with Tierre hose fittings.

The catalogue data are based on tests carried out at an ambient temperature of +20 °C and are not binding: they depend on the application, the operating temperature and the life of the hose.

Assembly and disassembly

The push-lock system does not need a hose clamp. To assemble, according to the catalogue instructions:

  1. cut the hose at 90° and leave the end clean;
  2. push the hose fitting into the hose (you can use soapy water as a lubricant to make assembly easier);
  3. push the hose up to the stop inside the plastic cap;
  4. make sure the hose is fully inserted.

To disassemble, cut the hose lengthwise from the plastic cap to the end of the hose fitting; then bend the hose to expose the fitting and pull it out.

Technical summary

Feature Value / Specification
Hose Tierre push-lock ASR-HH
Operating temperature -40 °C to +75 °C with air; 0 °C to +120 °C with water; ambient temperature -40 °C to +120 °C
Max working pressure 14 bar
Fluids Compressed air and industrial water
DN from 1/4″ to 5/8″
Construction synthetic rubber / high-strength textile layer / high-performance synthetic rubber
Compliance REACH 1907/2006, EU 2015/863, 100% silicone free

Product codes

Code DN (inch) DN (mm) ID (mm) OD (mm) Min. bend radius (mm) Max working pressure at 20 °C (bar) Weight (g/m) Coil length (m)
ASR-HH06 1/4″ 6 6.5 +0.4/-0.3 12.0 – 13.0 45 14 125 40
ASR-HH10 3/8″ 10 9.7 ±0.4 14.8 – 16.0 75 14 150 40
ASR-HH13 1/2″ 13 13.0 ±0.5 18.5 – 20.0 90 14 235 40
ASR-HH16 5/8″ 16 16.0 +0.7/-0.3 23.4 – 25.0 115 14 350 40

Codes by colour

DN Blue Red
1/4″ (6) ASR-HH06BL ASR-HH06RO
3/8″ (10) ASR-HH10BL ASR-HH10RO
1/2″ (13) ASR-HH13BL ASR-HH13RO
5/8″ (16) ASR-HH16BL ASR-HH16RO

Code ASR-HH06BL is available on request and minimum quantity.

Technical data from the catalogue Tierre Push-Lock Hoses & Fittings, ed. 2.1 09/2021.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO