Search
Products

AISI 316L stainless steel plug-in reducer for metric tube – XVRGJ – Tierre

The Tierre XVR series XVRGJ AISI 316L stainless steel plug-in reducer for metric tube has an AISI 316L stainless steel body and collet and is suitable for aggressive environments, critical operating conditions and food contact applications. For compressed air, vacuum, water and fluids compatible with its materials, for tubes from 4 to 10 mm. Working pressure up to 20 bar.

Available product codes: XVRGJ0604, XVRGJ0806, XVRGJ1008.

Description

How it works and applications

The Tierre XVR series XVRGJ AISI 316L stainless steel plug-in reducer for metric tube is a reducer with a stem of diameter ØD1 and a push-in connection for a smaller tube of diameter ØD2: it lets you connect a smaller tube to a fitting designed for a larger one.

XVR series push-in fittings have an AISI 316L stainless steel body and collet. The catalogue describes them as suitable for aggressive environments and critical operating conditions and for food contact applications, with an optimised compact design. Customised products can be developed on specific request.

The fitting is part of the Tierre XVR series AISI 316L stainless steel push-in fittings range, together with the AISI 316L stainless steel push-in reducing straight union XVRG and the AISI 316L stainless steel stem adapter BSPP thread XVRA-G.

Materials

The materials listed in the catalogue for the XVR series are:

  • Body: AISI 316L stainless steel
  • Collet: AISI 316L stainless steel
  • Spacer: PVDF-UHM compliant with the FDA directive
  • O-ring: FKM certified NSF/ANSI 61, compliant with the FDA directive
  • Seal: FKM certified NSF/ANSI 61, compliant with the FDA directive
  • Gripping ring: AISI 301 stainless steel
  • Collar: PVDF-UHM compliant with the FDA directive
  • Release ring for swivel systems: AISI 302 stainless steel

The products comply with REACH 1907/2006 and EU directive 2015/863.

Sizes available

The stem and tube combinations listed in the catalogue are:

Stem ØD1 (mm) Tube ØD2 (mm)
6 4
8 6
10 8

Compatible tubes and connection

Compatible with polyamide PA, polyethylene PE, FEP, PTFE and grooved stainless steel tubes. With metal tubes the tube ends must be deburred, to avoid cuts or other damage to the O-rings. For grooved stainless steel tubes the catalogue gives these dimensions:

Tube Ø (mm) L (mm) A (mm)
4 7.6 0.23
6 8.0 0.23
8 9.0 0.23

To connect correctly:

  1. cut the tube at 90° with a suitable tube cutter;
  2. push it fully in, up to the stop;
  3. pull it gently to check that it is locked.

A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.

Tube Ø (mm) Outside diameter tolerance (mm) Insertion length (mm)
4 ±0.1 14
6 ±0.1 15.5
8 ±0.1 17.5

Technical summary

Feature Value / Specification
Series Tierre XVR series AISI 316L stainless steel
Fluids Compressed air, vacuum, water and fluids suitable for the construction materials
Operating temperature -20 °C to 150 °C
Working pressure 20 bar
Vacuum -0.95 bar (-99 kPa)
Tube Ø from 4 to 10 mm
Compatible tubes Polyamide PA, polyethylene PE, FEP, PTFE, grooved stainless steel
Body and collet AISI 316L stainless steel
Compliance REACH 1907/2006, EU 2015/863

Product codes

Code ØD1 ØD2 ØP L1 L2
XVRGJ0604 6 4 10 17 28.5
XVRGJ0806 8 6 12 19.5 32.5
XVRGJ1008 10 8 14 24 38

Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet.

Technical data from the catalogue Tierre Serie XVR Inox AISI 316L, ed. 1.2 08/2020.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO