Search
Products

Fluidfit 100 mesh filter – HBMU – Tierre

The Tierre HBMU Fluidfit 100 mesh filter works up to 10 bar at 65 °C in continuous use (10 bar at 90 °C for 5 minutes max). Available for metric tubes from 8 to 10 mm and inch tubes from 1/4″ to 3/8″.

Available product codes: HBMU0808B, HBMU1010B, HBMU1/4-1/4G, HBMU3/8-3/8G.

Download

Catalogs and technical documentation

Fluidfit 100 mesh filter – HBMU – Tierre

Description

Features and application

The Tierre HBMU Fluidfit 100 mesh filter prevents debris in the water supply system with a 100 mesh stainless steel filter strainer. The screw cap is easy to install and allows easy replacement of the strainer during maintenance.

It combines the catalogue versions: HBMU – Metric sizes filter 100 mesh (metric tube); HBMU – Inch sizes filter 100 mesh (inch tube).

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit inline flow regulator HSTU and the Fluidfit AISI 304 stainless steel 100 mesh spare filter strainer HFS.

Technical data

Feature Value / Specification
Strainer Stainless steel, 100 mesh
Maximum temperature 65 °C for continuous use; 90 °C for short-term use (5 minutes max)
Maximum working pressure 10 bar at 65 °C for continuous use (10 bar at 90 °C for short-term use, 5 minutes max)
Tube (ØD) Metric tubes from 8 to 10 mm and inch tubes from 1/4″ to 3/8″

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

HBMU – Metric sizes filter 100 mesh (metric tube)

Code ØD1 ØD2 ØP1 ØP2 L1 L2 E1 E2 ØC B1 B2 Weight (g) Pcs/pack
HBMU0808B 8 8 20 20 43.5 66.5 35.3 28.2 37 17.5 17.5 40.9 20
HBMU1010B 10 10 20 20 43.5 66.5 35.6 28.5 37 20.1 20.1 37.6 20

HBMU – Inch sizes filter 100 mesh (inch tube)

Code ØD1 ØD2 ØP1 ØP2 L1 L2 E1 E2 ØC B1 B2 Weight (g) Pcs/pack
HBMU1/4-1/4G 1/4 1/4 15.5 15.5 43.5 62.0 32.4 24.1 38.5 16.9 16.9 40.7 20
HBMU3/8-3/8G 3/8 3/8 20 20 43.5 66.5 35.7 28.6 37 20.2 20.2 40.7 20

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO