Download
Catalogs and technical documentation
Fluidfit 2 ways hand valve with short handle – HBVU-S – Tierre
The Tierre HBVU-S Fluidfit 2 ways hand valve with short handle has a POM acetal resin body and EPDM seals and works up to 10 bar at 65 °C in continuous use (10 bar at 90 °C for 5 minutes max). Available for metric tubes from 6 to 12 mm and inch tubes from 1/4″ to 1/2″.
Available product codes: HBVU-S0606B, HBVU-S0808B, HBVU-S1010B, HBVU-S1212B, HBVU-S1/4-1/4W, HBVU-S5/16-5/16W, HBVU-S3/8-3/8W, HBVU-S1/2-1/2W.
Fluidfit 2 ways hand valve with short handle – HBVU-S – Tierre
The Tierre HBVU-S Fluidfit 2 ways hand valve with short handle is a 2 ways hand valve with short handle, designed for use in series with the HMCP bracket. It must only be used in fully open or fully closed position.
It combines the catalogue versions: HBVU-S – Valvola manuale 2 vie metrica con manopola corta, per utilizzo in batteria con staffa HMCP (metric tube); HBVU-S – Valvola manuale 2 vie in pollici con manopola corta, per utilizzo in batteria con staffa HMCP (inch tube).
Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses.
It is part of the Tierre Fluidfit fittings range, together with the Fluidfit 2 ways hand valve HBVU and the Fluidfit bracket for HBVU-S hand valves HMCP.
| Feature | Value / Specification |
|---|---|
| Maximum temperature | 65 °C for continuous use; 90 °C for short-term use (5 minutes max) |
| Maximum working pressure | 10 bar at 65 °C for continuous use (10 bar at 90 °C for short-term use, 5 minutes max) |
| Tube (ØD) | Metric tubes from 6 to 12 mm and inch tubes from 1/4″ to 1/2″ |
Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.
To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.
HBVU-S – Valvola manuale 2 vie metrica con manopola corta, per utilizzo in batteria con staffa HMCP (metric tube)
| Code | ØD1 | ØD2 | B1 | B2 | ØP1 | ØP2 | L1 | L2 | E1 | E2 | H | ØC | Weight (g) | Pcs/pack |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HBVU-S0606B | 6 | 6 | 16.1 | 16.1 | 15.5 | 15.5 | 9.5 | 34.5 | 25.9 | 51.7 | 11.1 | 19.2 | 15.8 | 25 |
| HBVU-S0808B | 8 | 8 | 17.5 | 17.5 | 17.6 | 17.6 | 9.5 | 34.5 | 26.8 | 53.5 | 11.1 | 19.2 | 17.2 | 25 |
| HBVU-S1010B | 10 | 10 | 20.1 | 20.1 | 20.0 | 20.0 | 12.5 | 42.3 | 31.5 | 63.0 | 13.7 | 24.2 | 28.6 | 15 |
| HBVU-S1212B | 12 | 12 | 23.7 | 23.7 | 23.0 | 23.0 | 12.5 | 42.3 | 35.2 | 70.4 | 13.7 | 24.2 | 35.0 | 15 |
HBVU-S – Valvola manuale 2 vie in pollici con manopola corta, per utilizzo in batteria con staffa HMCP (inch tube)
| Code | ØD1 | ØD2 | B1 | B2 | ØP1 | ØP2 | L1 | L2 | E1 | E2 | H | ØC | Weight (g) | Pcs/pack |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HBVU-S1/4-1/4W | 1/4 | 1/4 | 16.1 | 16.1 | 15.5 | 15.5 | 9.5 | 34.5 | 25.9 | 51.7 | 11.1 | 19.2 | 15.8 | 25 |
| HBVU-S5/16-5/16W | 5/16 | 5/16 | 17.5 | 17.5 | 17.6 | 17.6 | 9.5 | 34.5 | 26.8 | 53.5 | 11.1 | 19.2 | 17.2 | 25 |
| HBVU-S3/8-3/8W | 3/8 | 3/8 | 20.2 | 20.2 | 20.0 | 20.0 | 12.5 | 42.3 | 31.6 | 63.2 | 13.7 | 24.2 | 28.6 | 15 |
| HBVU-S1/2-1/2W | 1/2 | 1/2 | 23.9 | 23.9 | 23.0 | 23.0 | 12.5 | 42.3 | 35.4 | 70.8 | 13.7 | 24.2 | 35.0 | 15 |
Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.
Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.