The Tierre HCAS-P Fluidfit half cartridge in acetal resin is a metric and inch push-in half cartridge in acetal resin, to be mounted in a cavity made according to the catalogue dimensions (Base hole table). Available for metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″.
Available product codes: HCAS-P 04, HCAS-P 06, HCAS-P 08, HCAS-P 10, HCAS-P 12, HCAS-P 5/32, HCAS-P 1/4, HCAS-P 5/16, HCAS-P 3/8, HCAS-P 1/2.
The Tierre HCAS-P Fluidfit half cartridge in acetal resin is a metric and inch push-in half cartridge in acetal resin, to be mounted in a cavity made according to the catalogue dimensions (Base hole table).
Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses.
It is part of the Tierre Fluidfit fittings range, together with the Fluidfit full cartridge in brass HCAS-F and the Fluidfit half cartridge in brass HCAS-H.
| Feature | Value / Specification |
|---|---|
| Material | Acetal resin |
| Tube (ØD) | Metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″ |
The catalogue instructions for the HCAS-P half cartridge are: make a clean cavity as per drawing, mount the cartridge body, insert a clean o-ring, assemble the collet and test pressure and operation after installation. The cavity dimensions are in the Base hole table.
| Code | Tube Ø | ØA | B | Weight (g) | Pcs/pack |
|---|---|---|---|---|---|
| HCAS-P 04 | 4 | 11.85 | 5.0 | 0.8 | 200 |
| HCAS-P 06 | 6 | 13.30 | 4.6 | 0.9 | 200 |
| HCAS-P 08 | 8 | 13.70 | 5.6 | 1.1 | 100 |
| HCAS-P 10 | 10 | 15.90 | 6.9 | 1.4 | 100 |
| HCAS-P 12 | 12 | 19.60 | 7.9 | 2.6 | 100 |
| Code | Tube Ø | ØA | B | Weight (g) | Pcs/pack |
|---|---|---|---|---|---|
| HCAS-P 5/32 | 5/32 | 11.85 | 5.0 | 0.8 | 200 |
| HCAS-P 1/4 | 1/4 | 13.30 | 4.6 | 1.0 | 200 |
| HCAS-P 5/16 | 5/16 | 13.70 | 5.6 | 1.1 | 100 |
| HCAS-P 3/8 | 3/8 | 15.90 | 6.9 | 1.6 | 100 |
| HCAS-P 1/2 | 1/2 | 19.60 | 7.9 | 2.6 | 100 |
BASE HOLE
| Tube | ØD | ØE | ØF | ØG | H | I | J |
|---|---|---|---|---|---|---|---|
| 4 | 12.00 | 8.30 | 4.15 | 3.30 | 4.90 | 8.90 | 12.80 |
| 6 | 13.40 | 10.00 | 6.15 | 5.30 | 4.60 | 9.80 | 14.00 |
| 8 | 13.80 | 11.95 | 8.15 | 7.40 | 5.50 | 10.15 | 15.00 |
| 10 | 16.05 | 14.00 | 10.15 | 9.20 | 6.90 | 11.80 | 18.20 |
| 12 | 19.75 | 16.55 | 12.15 | 11.20 | 7.75 | 15.90 | 23.90 |
BASE HOLE
| Tube | ØD | ØE | ØF | ØG | H | I | J |
|---|---|---|---|---|---|---|---|
| 5/32 | 12.00 | 8.30 | 4.15 | 3.30 | 4.90 | 8.90 | 12.80 |
| 1/4 | 13.40 | 10.80 | 6.50 | 5.80 | 4.60 | 9.80 | 14.10 |
| 5/16 | 13.80 | 11.95 | 8.15 | 7.40 | 5.50 | 10.15 | 15.00 |
| 3/8 | 16.05 | 13.90 | 9.65 | 8.90 | 6.85 | 11.80 | 18.20 |
| 1/2 | 19.75 | 17.40 | 12.85 | 12.20 | 7.70 | 14.90 | 22.90 |
Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.
Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.