Search
Products

Fluidfit push-in male stem adapter BSPT, BSPP and NPTF – HCJ – Tierre

The Tierre HCJ Fluidfit push-in male stem adapter BSPT, BSPP and NPTF has a POM acetal resin body and EPDM o-ring and is designed for water, beverages, vacuum, compressed air and gases or liquids suitable with the materials: it works from -750 mmHg up to 20 bar, depending on tube and temperature, from 1 to 98 °C with air and fluids (from -20 °C with dry air), with BSPT from 1/8″ to 1/2″, BSPP from 1/8″ to 3/4″ and NPTF from 1/8″ to 1/2″ threads. Available for metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″.

Available product codes: HCJ04R01B, HCJ04R02B, HCJ06R01B, HCJ06R02B, HCJ08R01B, HCJ08R02B, HCJ08R03B, HCJ10R02B, HCJ10R03B, HCJ10R04B, HCJ12R03B, HCJ12R04B, HCJ04G01B, HCJ04G02B, HCJ06G01B, HCJ06G02B, HCJ08G01B, HCJ08G02B, HCJ08G03B, HCJ10G02B, HCJ10G03B, HCJ10G04B, HCJ12G03B, HCJ12G04B, HCJ15G03B, HCJ15G04B, HCJ22G04B, HCJ22G06B, HCJ1/4-R01G, HCJ1/2-R03G, HCJ1/2-R04G, HCJ5/32-N01G, HCJ5/32-N02G, HCJ3/16-N01G, HCJ1/4-N01G, HCJ1/4-N02G, HCJ5/16-N01G, HCJ5/16-N02G, HCJ5/16-N03G, HCJ3/8-N02G, HCJ3/8-N03G, HCJ1/2-N03G, HCJ1/2-N04G.

Description

Features and application

The Tierre HCJ Fluidfit push-in male stem adapter BSPT, BSPP and NPTF is an adapter with a stem on one side and a male threaded connection on the other.

It combines the catalogue versions: HCJ-R – Male stem adapter BSPT (metric tube); HCJ-G – Male stem adapter BSPP (metric tube); HCJ-R – Male stem adapter BSPT (inch tube); HCJ-N – Male stem adapter NPTF (inch tube).

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses. In the code, the final letter B stands for the black (metric) version and G for the grey (inch) version.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit push-in male elbow BSPT and NPTF HPL and the Fluidfit push-in male swivel elbow BSPT, BSPP and NPTF HRPL.

Materials

  • Body: POM acetal resin
  • Cover: POM acetal resin
  • Gripping collet: POM and AISI 301 stainless steel
  • O-ring: EPDM

Technical data

Feature Value / Specification
Fluids Water, beverages, vacuum, compressed air, gases and liquids suitable with the construction materials
Working temperature From -20 °C to 98 °C with dry air; from 1 °C to 98 °C with air and fluids
Working pressure From -750 mmHg up to 20 bar, depending on the tubes and temperatures applied
Plastic tubes Polyethylene (PE), polyamide (PA), polyurethane (PU), PTFE, FEP
Soft metal tubes Brass, copper, mild steel, aluminium
Hard metal tubes With a groove made according to the catalogue dimensions
Thread BSPT from 1/8″ to 1/2″, BSPP from 1/8″ to 3/4″ and NPTF from 1/8″ to 1/2″ threads
Tube (ØD) Metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″

Maximum torque values for BSP, BSPT and NPT plastic threads given in the catalogue; seal threaded connections with PTFE (Teflon) tape only.

Thread 1/8″ 1/4″ 3/8″ 1/2″ 3/4″
Max torque 1.5 Nm 1.5 Nm 3.0 Nm 3.0 Nm 4.0 Nm

Working pressures by diameter and temperature

Tube Ø -20 °C 1 °C 25 °C 70 °C
4 mm – 5/32″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
6 mm – 3/16″ – 1/4″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
8 mm – 5/16″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
10 mm – 3/8″ -750 mmHg → 16 bar -750 mmHg → 16 bar -750 mmHg → 14 bar -750 mmHg → 10 bar
12 mm – 1/2″ -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
15 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
22 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar

With 10 mm – 3/8″ tube at 98 °C: 0 to 8 bar with dry air only. System performance always depends on the fittings, tubes and accessories used, and the limits given refer to systems assembled with the HCP locking clip installed.

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

HCJ-R – Male stem adapter BSPT (metric tube)

Code ØD T (BSPT) A B ØE H L Weight (g) Pcs/pack
HCJ04R01B 4 R 1/8 9.1 18.0 14.4 13 33.1 1.8 100
HCJ04R02B 4 R 1/4 13.1 18.0 18.5 17 37.1 3.5 100
HCJ06R01B 6 R 1/8 9.1 19.5 14.4 13 34.6 2.0 100
HCJ06R02B 6 R 1/4 13.1 19.5 18.5 17 38.6 3.7 100
HCJ08R01B 8 R 1/8 9.1 21.0 14.4 13 36.1 2.2 100
HCJ08R02B 8 R 1/4 13.1 21.0 18.5 17 40.1 3.8 50
HCJ08R03B 8 R 3/8 13.5 21.0 23.0 21 40.5 5.3 50
HCJ10R02B 10 R 1/4 13.1 24.0 18.5 17 43.1 4.5 50
HCJ10R03B 10 R 3/8 13.5 24.0 23.0 21 44.0 6.1 50
HCJ10R04B 10 R 1/2 16.5 24.0 26.5 24 47.0 9.7 25
HCJ12R03B 12 R 3/8 13.5 28.0 23.0 21 48.0 6.8 50
HCJ12R04B 12 R 1/2 16.5 28.0 26.5 24 51.0 10.2 25

HCJ-G – Male stem adapter BSPP (metric tube)

Code ØD T (BSPP) A B ØE H L Weight (g) Pcs/pack
HCJ04G01B 4 G 1/8 6.0 18.0 16.6 15 32.5 2.7 100
HCJ04G02B 4 G 1/4 8.5 18.0 20.5 18 35.0 4.2 100
HCJ06G01B 6 G 1/8 6.0 19.5 16.6 15 34.0 2.8 100
HCJ06G02B 6 G 1/4 8.5 19.5 20.5 18 36.5 4.3 100
HCJ08G01B 8 G 1/8 6.0 21.0 16.6 15 35.5 3.0 100
HCJ08G02B 8 G 1/4 8.5 21.0 20.5 18 38.0 4.6 50
HCJ08G03B 8 G 3/8 9.0 21.0 24.2 22 38.5 6.2 50
HCJ10G02B 10 G 1/4 8.5 24.0 20.5 18 41.0 5.2 50
HCJ10G03B 10 G 3/8 9.0 24.0 24.2 22 41.5 6.8 50
HCJ10G04B 10 G 1/2 12.5 24.0 28.5 26 45.0 10.7 25
HCJ12G03B 12 G 3/8 9.0 28.0 24.2 22 45.5 7.3 50
HCJ12G04B 12 G 1/2 12.5 28.0 28.5 26 49.0 11.2 25
HCJ15G03B 15 G 3/8 9.0 35.0 24.2 22.0 52.5 9.5 50
HCJ15G04B 15 G 1/2 12.5 36.0 28.8 26 57.0 13.1 25
HCJ22G04B 22 G 1/2 12.5 41.0 28.4 26 62.0 16.8 20
HCJ22G06B 22 G 3/4 14.5 41.0 39.0 33 67.5 25.8 20

HCJ-R – Male stem adapter BSPT (inch tube)

Code ØD T (BSPT) A B ØE H L Weight (g) Pcs/pack
HCJ1/4-R01G 1/4 R 1/8 9.1 19.0 14.4 13 34.1 2.1 100
HCJ1/2-R03G 1/2 R 3/8 13.5 27.0 23.0 21 47.0 7.3 50
HCJ1/2-R04G 1/2 R 1/2 16.5 27.0 26.5 24 50.0 10.4 25

HCJ-N – Male stem adapter NPTF (inch tube)

Code ØD T (NPTF) A B ØE H L Weight (g) Pcs/pack
HCJ5/32-N01G 5/32 N 1/8 9.1 18.0 14.1 12.7 (1/2) 33.1 1.9 100
HCJ5/32-N02G 5/32 N 1/4 13.2 18.0 17.8 15.8 (5/8) 37.2 3.6 100
HCJ3/16-N01G 3/16 N 1/8 9.1 18.0 14.1 12.7 (1/2) 33.1 2.0 100
HCJ1/4-N01G 1/4 N 1/8 9.1 19.0 14.1 12.7 (1/2) 34.1 2.1 100
HCJ1/4-N02G 1/4 N 1/4 13.2 19.0 17.8 15.8 (5/8) 38.2 3.8 100
HCJ5/16-N01G 5/16 N 1/8 9.1 20.0 14.1 12.7 (1/2) 35.1 2.8 100
HCJ5/16-N02G 5/16 N 1/4 13.2 20.0 17.8 15.8 (5/8) 39.2 3.9 50
HCJ5/16-N03G 5/16 N 3/8 13.8 20.0 21.5 19.0 (3/4) 40.3 5.9 50
HCJ3/8-N02G 3/8 N 1/4 13.2 23.0 17.8 15.8 (5/8) 42.2 4.5 50
HCJ3/8-N03G 3/8 N 3/8 13.8 23.0 21.5 19.0 (3/4) 43.3 6.5 50
HCJ1/2-N03G 1/2 N 3/8 13.8 27.0 21.5 19.0 (3/4) 47.3 6.9 50
HCJ1/2-N04G 1/2 N 1/2 17.8 27.0 26.8 23.8 (15/16) 51.3 11.4 25

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO