Search
Products

Fluidfit push-in male swivel tee BSPT, BSPP and NPTF – HRPT – Tierre

The Tierre HRPT Fluidfit push-in male swivel tee BSPT, BSPP and NPTF has a POM acetal resin body and EPDM o-ring and is designed for water, beverages, vacuum, compressed air and gases or liquids suitable with the materials: it works from -750 mmHg up to 20 bar, depending on tube and temperature, from 1 to 98 °C with air and fluids (from -20 °C with dry air), with BSPT from 1/8″ to 1/2″, BSPP from 1/8″ to 1/2″ and NPTF from 1/8″ to 1/2″ threads. Available for metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″.

Available product codes: HRPT04R01B, HRPT04R02B, HRPT06R01B, HRPT06R02B, HRPT08R01B, HRPT08R02B, HRPT08R03B, HRPT10R02B, HRPT10R03B, HRPT10R04B, HRPT12R03B, HRPT12R04B, HRPT04G01B, HRPT04G02B, HRPT06G01B, HRPT06G02B, HRPT08G01B, HRPT08G02B, HRPT08G03B, HRPT10G02B, HRPT10G03B, HRPT10G04B, HRPT12G03B, HRPT12G04B, HRPT5/32-N01G, HRPT5/32-N02G, HRPT1/4-N01G, HRPT1/4-N02G, HRPT5/16-N01G, HRPT5/16-N02G, HRPT5/16-N03G, HRPT3/8-N02G, HRPT3/8-N03G, HRPT1/2-N03G, HRPT1/2-N04G.

Description

Features and application

The Tierre HRPT Fluidfit push-in male swivel tee BSPT, BSPP and NPTF is a swivel tee with a male threaded connection in the centre and two push-in connections for the tube on the sides.

It combines the catalogue versions: HRPT-R – Male swivel tee BSPT (metric tube); HRPT-G – Swivel male tee BSPP (metric tube); HRPT-N – Male swivel tee NPTF (inch tube).

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses. In the code, the final letter B stands for the black (metric) version and G for the grey (inch) version.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit push-in male swivel elbow BSPT, BSPP and NPTF HRPL and the Fluidfit push-in male swivel run tee BSPT, BSPP and NPTF HRST.

Materials

  • Body: POM acetal resin
  • Cover: POM acetal resin
  • Gripping collet: POM and AISI 301 stainless steel
  • O-ring: EPDM

Technical data

Feature Value / Specification
Fluids Water, beverages, vacuum, compressed air, gases and liquids suitable with the construction materials
Working temperature From -20 °C to 98 °C with dry air; from 1 °C to 98 °C with air and fluids
Working pressure From -750 mmHg up to 20 bar, depending on the tubes and temperatures applied
Plastic tubes Polyethylene (PE), polyamide (PA), polyurethane (PU), PTFE, FEP
Soft metal tubes Brass, copper, mild steel, aluminium
Hard metal tubes With a groove made according to the catalogue dimensions
Thread BSPT from 1/8″ to 1/2″, BSPP from 1/8″ to 1/2″ and NPTF from 1/8″ to 1/2″ threads
Tube (ØD) Metric tubes from 4 to 12 mm and inch tubes from 5/32″ to 1/2″

Maximum torque values for BSP, BSPT and NPT plastic threads given in the catalogue; seal threaded connections with PTFE (Teflon) tape only.

Thread 1/8″ 1/4″ 3/8″ 1/2″ 3/4″
Max torque 1.5 Nm 1.5 Nm 3.0 Nm 3.0 Nm 4.0 Nm

Working pressures by diameter and temperature

Tube Ø -20 °C 1 °C 25 °C 70 °C
4 mm – 5/32″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
6 mm – 3/16″ – 1/4″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
8 mm – 5/16″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
10 mm – 3/8″ -750 mmHg → 16 bar -750 mmHg → 16 bar -750 mmHg → 14 bar -750 mmHg → 10 bar
12 mm – 1/2″ -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
15 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
22 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar

With 10 mm – 3/8″ tube at 98 °C: 0 to 8 bar with dry air only. System performance always depends on the fittings, tubes and accessories used, and the limits given refer to systems assembled with the HCP locking clip installed.

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

HRPT-R – Male swivel tee BSPT (metric tube)

Code ØD T (BSPT) ØP A B E H L Weight (g) Pcs/pack
HRPT04R01B 4 R 1/8 13.2 9.1 14.7 17.9 15.0 29.7 7.8 50
HRPT04R02B 4 R 1/4 13.2 13.1 14.7 17.9 17.0 33.7 9.2 50
HRPT06R01B 6 R 1/8 15.0 9.1 16.1 20.1 17.0 31.7 9.3 50
HRPT06R02B 6 R 1/4 15.0 13.1 16.1 20.1 17.0 35.7 10.3 25
HRPT08R01B 8 R 1/8 17.6 9.1 17.5 21.9 19.0 33.4 13.1 25
HRPT08R02B 8 R 1/4 17.6 13.1 17.5 21.9 19.0 37.4 14.0 25
HRPT08R03B 8 R 3/8 17.6 13.5 17.5 21.9 19.0 37.8 14.6 25
HRPT10R02B 10 R 1/4 20.0 13.1 20.1 25.8 21.0 41.4 19.5 25
HRPT10R03B 10 R 3/8 20.0 13.5 20.1 25.8 21.0 41.8 19.6 20
HRPT10R04B 10 R 1/2 20.0 16.5 20.1 25.8 24.0 44.8 23.9 20
HRPT12R03B 12 R 3/8 23.0 13.5 24.7 31.7 24.0 42.8 30.2 15
HRPT12R04B 12 R 1/2 23.0 16.5 24.7 31.7 24.0 51.2 32.7 12

HRPT-G – Swivel male tee BSPP (metric tube)

Code ØD T (BSPP) ØP A B E H L Weight (g) Pcs/pack
HRPT04G01B 4 G 1/8 13.2 6.0 14.7 17.9 15 28.5 7.9 50
HRPT04G02B 4 G 1/4 13.2 8.5 14.7 17.9 18 31.0 9.6 50
HRPT06G01B 6 G 1/8 15.0 6.0 16.1 20.1 17 30.5 10.0 50
HRPT06G02B 6 G 1/4 15.0 8.5 16.1 20.1 18 33.0 11.0 25
HRPT08G01B 8 G 1/8 17.6 6.0 17.5 21.9 18 31.9 13.4 25
HRPT08G02B 8 G 1/4 17.6 8.5 17.5 21.9 18 34.4 14.0 25
HRPT08G03B 8 G 3/8 17.6 9.0 17.5 21.9 22 34.9 15.8 25
HRPT10G02B 10 G 1/4 20.0 8.5 20.1 25.8 22 38.0 19.8 25
HRPT10G03B 10 G 3/8 20.0 9.0 20.1 25.8 22 38.5 20.2 20
HRPT10G04B 10 G 1/2 20.0 12.5 20.1 25.8 26 42.0 23.5 20
HRPT12G03B 12 G 3/8 23.0 9.0 24.7 31.7 26 43.7 30.0 15
HRPT12G04B 12 G 1/2 23.0 12.5 24.7 31.7 26 47.2 32.0 12

HRPT-N – Male swivel tee NPTF (inch tube)

Code ØD T (NPTF) ØP A B E H L Weight (g) Pcs/pack
HRPT5/32-N01G 5/32 N 1/8 13.2 9.1 14.7 17.8 15.8(5/8) 29.7 8.1 50
HRPT5/32-N02G 5/32 N 1/4 13.2 13.2 14.7 17.9 15.8(5/8) 33.8 8.9 50
HRPT1/4-N01G 1/4 N 1/8 15.5 9.1 16.9 21.0 17.46 (11/16) 32.8 10.2 50
HRPT1/4-N02G 1/4 N 1/4 15.5 13.2 16.9 21.0 17.46 (11/16) 36.9 11.3 25
HRPT5/16-N01G 5/16 N 1/8 17.6 9.1 17.5 21.9 19.0(3/4) 33.8 13.6 25
HRPT5/16-N02G 5/16 N 1/4 17.6 13.2 17.5 21.9 19.0(3/4) 37.9 14.4 25
HRPT5/16-N03G 5/16 N 3/8 17.6 13.8 17.5 21.9 19.0(3/4) 38.5 15.4 25
HRPT3/8-N02G 3/8 N 1/4 20.0 13.2 20.2 25.9 21.4 (27/32) 41.9 20.2 25
HRPT3/8-N03G 3/8 N 3/8 20.0 13.0 20.2 25.9 21.4 (27/32) 41.8 20.4 20
HRPT1/2-N03G 1/2 N 3/8 23.0 13.8 25.1 31.9 23.8(15/16) 48.5 29.8 15
HRPT1/2-N04G 1/2 N 1/2 23.0 17.8 25.1 31.9 23.8(25/16) 51.5 32.4 12

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO