Search
Products

Fluidfit push-in union connector – HUC – Tierre

The Tierre HUC Fluidfit push-in union connector has a POM acetal resin body and EPDM o-ring and is designed for water, beverages, vacuum, compressed air and gases or liquids suitable with the materials: it works from -750 mmHg up to 20 bar, depending on tube and temperature, from 1 to 98 °C with air and fluids (from -20 °C with dry air). Available for metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″.

Available product codes: HUC0404B, HUC0606B, HUC0808B, HUC1010B, HUC1212B, HUC1515B, HUC2222B, HUC0604B, HUC0605B, HUC0804B, HUC0806B, HUC1006B, HUC1008B, HUC1208B, HUC1210B, HUC5/32-5/32G, HUC3/16-3/16G, HUC1/4-1/4G, HUC5/16-5/16G, HUC3/8-3/8G, HUC1/2-1/2G, HUC5/16-5/32G, HUC5/16-1/4G, HUC3/8-3/16G, HUC3/8-1/4G, HUC3/8-5/16G, HUC1/2-5/16G, HUC1/2-3/8G, HUC1/4-06G.

Download

Catalogs and technical documentation

Fluidfit push-in union connector – HUC – Tierre

Description

Features and application

The Tierre HUC Fluidfit push-in union connector is a straight union with a push-in connection at both ends, to join two tubes of the same diameter or, in the reduced versions, of different diameters.

It combines the catalogue versions: HUC – Union connector (metric tube); HUC – Union connector (inch tube).

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses. In the code, the final letter B stands for the black (metric) version and G for the grey (inch) version.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit push-in union elbow HUL and the Fluidfit push-in union elbow 45° HUGL.

Materials

  • Body: POM acetal resin
  • Cover: POM acetal resin
  • Gripping collet: POM and AISI 301 stainless steel
  • O-ring: EPDM

Technical data

Feature Value / Specification
Fluids Water, beverages, vacuum, compressed air, gases and liquids suitable with the construction materials
Working temperature From -20 °C to 98 °C with dry air; from 1 °C to 98 °C with air and fluids
Working pressure From -750 mmHg up to 20 bar, depending on the tubes and temperatures applied
Plastic tubes Polyethylene (PE), polyamide (PA), polyurethane (PU), PTFE, FEP
Soft metal tubes Brass, copper, mild steel, aluminium
Hard metal tubes With a groove made according to the catalogue dimensions
Tube (ØD) Metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″

Working pressures by diameter and temperature

Tube Ø -20 °C 1 °C 25 °C 70 °C
4 mm – 5/32″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
6 mm – 3/16″ – 1/4″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
8 mm – 5/16″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
10 mm – 3/8″ -750 mmHg → 16 bar -750 mmHg → 16 bar -750 mmHg → 14 bar -750 mmHg → 10 bar
12 mm – 1/2″ -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
15 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
22 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar

With 10 mm – 3/8″ tube at 98 °C: 0 to 8 bar with dry air only. System performance always depends on the fittings, tubes and accessories used, and the limits given refer to systems assembled with the HCP locking clip installed.

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

HUC – Union connector (metric tube)

Code ØD1 ØD2 B1 B2 ØE1 ØE2 L Weight (g) Pcs/pack
HUC0404B 4 4 14.7 14.7 13.2 13.2 31.8 3.8 100
HUC0606B 6 6 16.1 16.1 15.0 15.0 35.2 4.7 100
HUC0808B 8 8 17.5 17.5 17.6 17.6 38.2 6.9 50
HUC1010B 10 10 20.1 20.1 20.0 20.0 42.7 9.2 50
HUC1212B 12 12 24.7 24.7 23.0 23.0 52.4 14.4 25
HUC1515B 15 15 29.4 29.4 28.0 28.0 61.8 23.4 20
HUC2222B 22 22 33.8 33.8 35.5 35.5 70.6 37.7 9
Code ØD1 ØD2 B1 B2 ØE1 ØE2 L Weight (g) Pcs/pack
HUC0604B 6 4 16.1 14.7 15.0 15.0 35.0 5.0 100
HUC0605B 6 5 16.1 14.9 15.0 15.0 35.1 4.9 100
HUC0804B 8 4 17.5 14.7 17.6 17.6 36.6 6.5 50
HUC0806B 8 6 17.5 16.1 17.6 17.6 37.8 7.1 50
HUC1006B 10 6 20.1 16.1 20.0 15.5 42.0 9.8 50
HUC1008B 10 8 20.1 17.5 20.0 20.0 42.4 9.6 50
HUC1208B 12 8 24.7 17.5 23.6 17.6 44.4 11.5 25
HUC1210B 12 10 24.7 20.1 23.0 23.0 51.7 15.0 25

HUC – Union connector (inch tube)

Code ØD1 ØD2 B1 B2 ØE1 ØE2 L Weight (g) Pcs/pack
HUC5/32-5/32G 5/32 5/32 14.7 14.7 13.2 13.2 31.8 3.8 100
HUC3/16-3/16G 3/16 3/16 15.0 15.0 13.8 13.8 32.5 4.0 100
HUC1/4-1/4G 1/4 1/4 16.9 16.9 15.5 15.5 36.2 5.2 100
HUC5/16-5/16G 5/16 5/16 17.5 17.5 17.6 17.6 38.2 6.9 50
HUC3/8-3/8G 3/8 3/8 20.2 20.2 20.0 20.0 42.9 9.7 50
HUC1/2-1/2G 1/2 1/2 25.1 25.1 23.6 23.6 53.2 14.6 25

Reduction

Code ØD1 ØD2 B1 B2 ØE1 ØE2 L Weight (g) Pcs/pack
HUC5/16-5/32G 5/16 5/32 17.5 14.7 17.6 17.6 36.6 6.5 50
HUC5/16-1/4G 5/16 1/4 17.5 16.9 17.6 17.6 36.8 6.0 50
HUC3/8-3/16G 3/8 3/16 20.2 15.0 20.0 13.8 37.2 6.9 50
HUC3/8-1/4G 3/8 1/4 20.2 16.9 20.0 15.5 38.5 7.3 50
HUC3/8-5/16G 3/8 5/16 20.2 17.5 20.0 20.0 42.5 9.9 50
HUC1/2-5/16G 1/2 5/16 25.1 17.5 23.6 17.6 44.6 11.2 25
HUC1/2-3/8G 1/2 3/8 25.1 20.2 23.6 23.6 52.4 16.3 25
Code ØD1 ØD2 B1 B2 ØE1 ØE2 L Weight (g) Pcs/pack
HUC1/4-06G 1/4 06 16.9 16.1 15.5 15.5 36.2 5.3 100

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO