Search
Products

Fluidfit push-in union tee – HUT – Tierre

The Tierre HUT Fluidfit push-in union tee has a POM acetal resin body and EPDM o-ring and is designed for water, beverages, vacuum, compressed air and gases or liquids suitable with the materials: it works from -750 mmHg up to 20 bar, depending on tube and temperature, from 1 to 98 °C with air and fluids (from -20 °C with dry air). Available for metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″.

Available product codes: HUT0404B, HUT0606B, HUT0808B, HUT1010B, HUT1212B, HUT1515B, HUT2222B, HUT100608B, HUT100610B, HUT121012B, HUT221222B, HUT221522B, HUT5/32-5/32G, HUT3/16-3/16G, HUT1/4-1/4G, HUT5/16-5/16G, HUT3/8-3/8G, HUT1/2-1/2G, HUT3/8-1/4-3/8G, HUT1/2-3/8-1/2G, HUT3/8-08-3/8G, HUT3/8-10-3/8G.

Download

Catalogs and technical documentation

Fluidfit push-in union tee – HUT – Tierre

Description

Features and application

The Tierre HUT Fluidfit push-in union tee is a union tee with three push-in connections, also in reduced versions.

It combines the catalogue versions: HUT – Union tee (metric tube); HUT – Union tee (inch tube).

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses. In the code, the final letter B stands for the black (metric) version and G for the grey (inch) version.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit push-in union elbow HUL and the Fluidfit push-in union Y HUY.

Materials

  • Body: POM acetal resin
  • Cover: POM acetal resin
  • Gripping collet: POM and AISI 301 stainless steel
  • O-ring: EPDM

Technical data

Feature Value / Specification
Fluids Water, beverages, vacuum, compressed air, gases and liquids suitable with the construction materials
Working temperature From -20 °C to 98 °C with dry air; from 1 °C to 98 °C with air and fluids
Working pressure From -750 mmHg up to 20 bar, depending on the tubes and temperatures applied
Plastic tubes Polyethylene (PE), polyamide (PA), polyurethane (PU), PTFE, FEP
Soft metal tubes Brass, copper, mild steel, aluminium
Hard metal tubes With a groove made according to the catalogue dimensions
Tube (ØD) Metric tubes from 4 to 22 mm and inch tubes from 5/32″ to 1/2″

Working pressures by diameter and temperature

Tube Ø -20 °C 1 °C 25 °C 70 °C
4 mm – 5/32″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
6 mm – 3/16″ – 1/4″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
8 mm – 5/16″ -750 mmHg → 20 bar -750 mmHg → 20 bar -750 mmHg → 16 bar -750 mmHg → 10 bar
10 mm – 3/8″ -750 mmHg → 16 bar -750 mmHg → 16 bar -750 mmHg → 14 bar -750 mmHg → 10 bar
12 mm – 1/2″ -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
15 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar
22 mm -750 mmHg → 14 bar -750 mmHg → 14 bar -750 mmHg → 8 bar -750 mmHg → 6 bar

With 10 mm – 3/8″ tube at 98 °C: 0 to 8 bar with dry air only. System performance always depends on the fittings, tubes and accessories used, and the limits given refer to systems assembled with the HCP locking clip installed.

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

HUT – Union tee (metric tube)

Code ØD1 ØD2 ØD3 B1 B2 B3 ØE1 ØE2 ØE3 H L Weight (g) Pcs/pack
HUT0404B 4 4 4 14.7 14.7 14.7 13.2 13.2 13.2 24.5 35.8 5.8 100
HUT0606B 6 6 6 16.1 16.1 16.1 15.0 15.0 15.0 27.6 40.2 7.3 50
HUT0808B 8 8 8 17.5 17.5 17.5 17.6 17.6 17.6 30.7 43.8 10.6 50
HUT1010B 10 10 10 20.1 20.1 20.1 20.0 20.0 20.0 35.8 51.6 14.6 25
HUT1212B 12 12 12 24.7 24.7 24.7 23.0 23.0 23.0 43.2 63.4 23.2 20
HUT1515B 15 15 15 29.4 29.4 29.4 28.0 28.0 28.0 52.2 76.4 38.2 9
HUT2222B 22 22 22 33.8 33.8 33.8 35.5 35.5 35.5 63.9 92.3 64.0 6
Code ØD1 ØD2 ØD3 B1 B2 B3 ØE1 ØE2 ØE3 H L Weight (g) Pcs/pack
HUT100608B 10 6 8 20.1 16.1 17.5 20.0 15.0 20.0 32.1 48.6 15.6 25
HUT100610B 10 6 10 20.1 16.1 20.1 20.0 15.0 20.0 32.1 48.7 12.0 25
HUT121012B 12 10 12 24.7 20.1 24.7 23.0 23.0 23.0 42.5 63.4 24.2 20
HUT221222B 22 12 22 33.8 24.7 33.8 35.5 23.0 35.5 55.8 83.0 50.3 6
HUT221522B 22 15 22 33.8 30.4 33.8 35.5 28.0 35.5 61.0 87.0 57.1 6

HUT – Union tee (inch tube)

Code ØD1 ØD2 ØD3 B1 B2 ØE1 ØE2 H L Weight (g) Pcs/pack
HUT5/32-5/32G 5/32 5/32 5/32 14.7 14.7 13.2 13.2 24.5 35.8 5.7 100
HUT3/16-3/16G 3/16 3/16 3/16 15.0 15.0 13.8 13.8 25.5 37.2 6.2 100
HUT1/4-1/4G 1/4 1/4 1/4 16.9 16.9 15.5 15.5 28.8 42.0 8.1 50
HUT5/16-5/16G 5/16 5/16 5/16 17.5 17.5 17.6 17.6 30.7 43.8 10.6 50
HUT3/8-3/8G 3/8 3/8 3/8 20.2 20.2 20.0 20.0 35.9 51.8 15.4 25
HUT1/2-1/2G 1/2 1/2 1/2 25.1 25.1 23.0 23.0 43.4 63.8 23.2 20
Code ØD1 ØD2 ØD3 B1 B2 ØE1 ØE2 H L Weight (g) Pcs/pack
HUT3/8-1/4-3/8G 3/8 1/4 3/8 20.2 16.9 20.0 15.0 32.1 48.8 12.2 25
HUT1/2-3/8-1/2G 1/2 3/8 1/2 24.6 20.2 23.0 23.0 42.6 63.8 25.3 20
Code ØD1 ØD2 ØD3 B1 B2 ØE1 ØE2 H L Weight (g) Pcs/pack
HUT3/8-08-3/8G 3/8 08 3/8 20.2 17.5 20.0 20.0 35.5 51.8 13.7 25
HUT3/8-10-3/8G 3/8 10 3/8 20.2 20.1 20.0 15.0 35.8 51.8 15.4 25

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO