Search
Products

Fluidfit valved barb connector – HCVB – Tierre

The Tierre HCVB Fluidfit valved barb connector has a POM acetal resin body and EPDM seals and works up to 10 bar at 65 °C in continuous use (10 bar at 90 °C for 5 minutes max). Available for metric tubes from 15 to 22 mm.

Available product codes: HCVB15-1/2B, HCVB22-1/2B, HCVB22-3/4B.

Download

Catalogs and technical documentation

Fluidfit valved barb connector – HCVB – Tierre

Description

Features and application

The Tierre HCVB Fluidfit valved barb connector is a valved barb connector specially designed for mounting with flexible tubes, which allows the flow to be stopped when needed.

Fluidfit products are designed for water, food and air contact but can also be used with selected gases, vacuum and other liquids; easy actions allow the tube to be connected and released quickly, saving time and expenses.

It is part of the Tierre Fluidfit fittings range, together with the Fluidfit 3 ways hand valve BSPP 1/2″ with diverting connection for 1/4″ tube HAAV and the Fluidfit 3 ways hand valve with tee direction HASV.

Materials

  • Body, valve, covers and rings: POM acetal resin
  • O-rings: EPDM
  • Gripping collet: POM and AISI 301 stainless steel

Technical data

Feature Value / Specification
Maximum temperature 65 °C for continuous use; 90 °C for short-term use (5 minutes max)
Maximum working pressure 10 bar at 65 °C for continuous use (10 bar at 90 °C for short-term use, 5 minutes max)
Tube (ØD) Metric tubes from 15 to 22 mm

Connecting and disconnecting the tube

Make sure the tube and the push-in system are the same size and cut the tube square with a proper tube cutter, such as the ETC tube cutter; the tube must be clean, without scratches, cuts or deformities. Insert it by hand up to the end stop, without tools, and pull it once without releasing the collet to check it is connected; then fit the locking clip between body and collet and push the tube in again.

To disconnect, completely eliminate the pressure from the system, remove the clip, push the collet towards the fitting body and pull the tube keeping the collet pushed. When using metallic tubing, always deburr the tube ends to avoid damaging the o-rings.

Product codes

Code ØD1 ØD2 Barb ØP L A B Weight (g) Pcs/pack
HCVB15-1/2B 15 1/2 13.3 28.5 74.2 22.3 29.4 29.3 20
HCVB22-1/2B 22 1/2 13.3 35.7 87.3 22.3 33.8 38.9 20
HCVB22-3/4B 22 3/4 20.25 35.7 99.0 30.0 33.8 47.7 20

Dimensions refer to the technical drawing in the downloadable PDF data sheet; inch version dimensions are given as in the catalogue.

Technical data from the catalogue Tierre Fluidfit, fittings for potable water, drink dispensers and beverages, Rev. 3.0.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO