Search
Products

Food grade push-in fitting straight round body male metric thread – HFROC – Tierre

The Tierre HFR series HFROC food grade push-in fitting straight round body male metric thread is made of brass with TEA+ surface treatment, resistant to corrosion and chemicals. It is suitable for compressed air, vacuum, water and fluids compatible with its materials, including the food sector and coffee machines, for tubes from 4 to 6 mm, with metric thread (ISO 262) M7. Working pressure up to 20 bar.

Available product codes: HFROC04M7, HFROC06M7C.

Description

How it works and applications

The Tierre HFR series HFROC food grade push-in fitting straight round body male metric thread is a straight push-in fitting with a round body, a male M7 metric thread and a push-in connection for 4 and 6 mm tubes.

HFR series push-in fittings have a brass body and collet with TEA+ surface treatment, which provides high resistance to corrosion and chemicals. They are designed for reliability and high mechanical efficiency and can be used in the food sector and in coffee machines. They are made in Italy and, on specific request, customised versions can be developed.

The fitting is part of the Tierre HFR series food grade push-in fittings range, together with the food grade push-in fitting straight male BSPP parallel and metric thread HFRC-G.

TEA+ treatment

The TEA+ surface treatment is highly resistant to corrosion in acidic or alkaline environments. According to the catalogue:

  • 2-4 µm thicknesses withstand NSS salt spray tests;
  • passed ASS 96 h and CASS 48 h salt spray tests;
  • EN 16058, 26-week test bench;
  • NSF 61 section 8, pH5 Hot Commercial (82 °C), for taps, sanitary ware and HVAC;
  • EN 16889, for professional coffee machines and other “food zone” devices.

Materials

The materials listed in the catalogue for the HFR series are:

  • Body: brass with TEA+ surface treatment
  • Collet: brass with TEA+ surface treatment
  • Collar: PVDF-UHM compliant with the FDA directive
  • Gripping ring: AISI 301 stainless steel
  • Spacer: PVDF-UHM compliant with the FDA directive
  • O-ring: FKM certified NSF/ANSI 61 and compliant with the FDA directive
  • Sealing ring for swivel systems: AISI 302 stainless steel

Threads and sizes available

Available with metric thread (ISO 262) M7, for tubes from 4 to 6 mm. The combinations listed in the catalogue are:

Tube Ø (mm) Available threads
4 M7x1
6 M7x1

Tightening torque given in the catalogue:

Thread Torque (Nm)
M7x1 0.8

Connecting and disconnecting the tube

Compatible with polyamide PA, polyethylene PE, FEP and PTFE tubes. To connect correctly:

  1. cut the tube at 90° with a suitable tube cutter;
  2. push it fully in, up to the stop;
  3. pull it gently to check that it is locked.

A damaged, scratched or oval tube can cause air leaks or unexpected disconnection. To disconnect, make sure the tube is not under pressure, then press the release ring and pull the tube out at the same time; to reuse it, cut off the section that was held in the fitting.

Tube Ø (mm) Outside diameter tolerance (mm) Insertion length (mm)
4 ±0.1 14
6 ±0.1 15.5

Technical summary

Feature Value / Specification
Series Tierre HFR series food grade
Fluids Compressed air and vacuum, water and fluids compatible with the construction materials
Operating temperature -20 °C to 150 °C
Working pressure 20 bar
Vacuum -0.95 bar (-99 kPa)
Thread Metric thread (ISO 262) M7
Tube Ø from 4 to 6 mm
Compatible tubes Polyamide PA, polyethylene PE, FEP, PTFE
Body Brass with TEA+ surface treatment
Sectors Food, coffee machines and industrial applications

Product codes

Code ØD T ØP A L H
HFROC04M7 4 M7x1 10 6 20.5 2.5
HFROC06M7C 6 M7x1 10 5.5 20.5 4

Dimensions are in mm and refer to the technical drawing in the downloadable PDF data sheet.

Technical data from the catalogue Tierre Food grade Serie HFR, ed. 1.0 08/2020.

Brands

List of Manufacturers Brands

TIERREGROUP

RUOTA IL DISPOSITIVO PER VISUALIZZARE CORRETTAMENTE IL SITO